~~Click on Sample to view full size~~
This Tutorial was written on June 30^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of VeryMany

You must purchase a license to use their tubes and can do so HERE

Scrapkit of Choice

I am using part of a collab called “Tech Savvy” This portion is by Designs by Sarah

You can find this collab for purchase HERE

Additonal Filers Needs

Penta → Jeans

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame 4

Add to your canvas

Resize to 70%

Add a drop shadow

Open pp1

Resize to 600px by 600px

Add to your canvas below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection and on the paper layer press delete

Open background 1

Add to your canvas below the paper layer

Resize and reposition to your liking

Add your tube to your canvas

Resize and reposition to your liking

Have below the frame but above the paper layer

Erase any of the legs that are outside the frame

Duplicate and change the layer of this one to above the frame

On the one below add a drop shadow

On the one above erase any of the legs that are over the frame

Duplicate this layer once you have that

On the new layer

Filer → Blur → Gaussian Blur, 3.0 px

Change the blend mode to soft light

Add your tube to your canvas a couple more time below the bottom tube we've already added

Flip one horizontally, resize and reposition

Once you have them where you want them erase any of the tubes that are outside the frame

Change the blend modes to luminosity, the opacity to 70%

Duplicate the paper background layer and bring above the tubes we just added

Filer → Penta → Jeans

amount – 20

border width – 4

Change the blend mode to soft light

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

ribbon 3

disk 1

USB cord 2

rss feed icon

tag 2

disk 1

email icon

blogger icon

pintrest icon

linkd in icon

flicker icon

facebook icon

flower 1

flower 3

flower 2

bow 1

bow 1

twitter icon

word art 3

flower 1

flower 2

flower 3

flower 3

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on June 28^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube Of Choise

I am using the awesome artwork of Danny Lee

You can find this tube HERE

Be sure to check out all the awesome tubes he has while you're there

Template of Choice

I used Template036 by Dave @ Spawn's Forum Set Templates

You can find them HERE

Additional Filters needed

VanDerLee – Unplugged-X

Xenofex 2 - Constellation

~*~*~ Let's Get Started~*~*~

Open the template

Delete the credits layer

Add a new layer above the “background layer”

Flood fill with gradient of choice

Delete the original background layer

Add a new layer above the “White Wavey Lines”

Select the white wavey lines and on the new layer

Flood Fill with a light color from your tube

Delete the orignal white wavey lines layer

Filter → VanDerLee → Unplugged-X → Pattern Offset

Change the blend mode to soft light

Add a new layer above the “Left RisingSun background”

Flood fill with the gradient we used before but flip it horizontally

Duplicate this layer and drag it to just above the “Right RisingSun Background”

Select the Left Rising song background so you have the ants around them

Invert the selection

On the gradient we just added above it, press delete

Deselect

Repeat this with the one on the Right as well

Delete the originals

Change the blend mode of each to color

Add an inner shadow to each

Change the blend mode to normal, use a light pink from your tube, change the size to 16, everything else at default

Change each of the outlines to a darker color of your choice, I went with a teal color from her eyes

Delete the originals if you added a new layer to do this

Add a drop shadow to this layer, I just used the standard drop shadow I usually use

For the dots, change their color to the same color you used for the “White wavey lines” before

Delete the originals if you added a new layer to do this

Change their blend modes to overlay

To the left add your close up of your tube

Just above the “White Wave Lines”

Resize and reposition as you'd like

Once you have this duplicate it

Flip the new one horizontally and move it over to the right of the canvas in the same position as the other

Change the blend modes to Luminosity, the opacity to 30%

Duplicate each of them

Erase any of the new layers that are outside the rays

Have them just above these ray layers

Change the blend mode to overlay and the opacity to 50%

Add you full body tube in the middle

Resize and reposition to your liking

Duplicate this layer

On the bottom one, add a drop shadow

On the top one

Filter → Blur → Gaussian Blur, 3.0 px

Change the blend mode to soft light lower the opacity to 50%

Add the words Sexy and Girl to your tag in white

Add the Pattern offset from before

Change the blend mode to soft light, add an outer glow to the words

Fill the white border with the gradient we've been using

Filer → Noise → Add Noise

Amount – 12.5%

Gaussian

Monochromatic checked

Select the border

Add a new layer

Select → Modify → Expand, by 2

Fill with black

have this layer below the gradient border we have

change the blend mode to overlay

Add your name

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

Now if you want to animate

Duplicate your wavey lines 3 times, so you have a total of four layers

On the first layer

Filer → Xenofex 2 → Constellation

Star Size – 2.00

Size Variation – 25

Edge Star Density – 10

Overall Star Density – 0

Overdrive – 100

Twinkle amount – 100

Keep Original image

Click okay

Repeat this for each of the other 3 layer but, make sure you click random seed once for each of them

Now just have each one showing for a new layer in your animation program and it should have the sparkle you want

Press Play to watch it go, if you like it save it as a .gif and you're done!

Now for the Avi

Create a new Canvas 125px by px

Flood fill with black

On your banner merge all but your name and the borders

Drag the black background we just made over

Create a clipping mask

Resize and repostion the banner as you'd like in the avi

Merge them

Drag it back over to the other canvas

Add borders as we did before

Add your name or initial

***Most important***

Add your copyright information

Save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on June 28^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Scrapkit of Choice

I am using the PTU scrapkit “Dino-Riffic” by Polkdot Scraps

You can find this kit HERE

Mask of Choice

I am using Mask365 by Vix

You can find that for download HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Make some wordart if you want to, I used paper12 in mine

Use which elements you like to, I used the following from the bottom in the layers up

With a drop shadow, unless stated:

scatter1 (no drop shadow)

scatter3

scatter3

leaves2

flower6

flower5

flower3

flower2

dino2

dino4

sun

button2

button2

button2

Open paper4

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the mask to this layer

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on June 28^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Rion aka Pin Up Toons

This was a bonus tube in August but he has so many other awesome tubes

You can view them HERE

Scrapkit of Choice

I am using the PTU scrapkit “Fairy Dust” by Mythical Desings

You can find this kit HERE

Mask of Choice

I am using Mask362 by Vix

You can find that for download HERE

Additonal Filers Needs

Xero – Porcelain

VanDerLee → Unplugged-X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Frame1

Add to your canvas

Resize to 65%

Add a drop shadow

Open Paper14

Resize to 600px by 600px

Add to your canvas, have this above the frame but, hide it so that you can see what you're doing with the frame

Use your magic wand to select all the black parts of the frame we added

Copy and paste as a new layer the black part

Select this and invert the selection

Unhide the paper layer and then press delete

Drag the paper layer below the copy of the black portions

Lower the opacity of the paper to 50%

On the duplicate black layer

Filer → VanDerLee → Unplugged-X – Pattern Offset

Change the blend mode to soft light

Open Paper7

Resize to 600px by 600px

Add to your canvas below the frame

Apply the mask to this layer

Now open your tube and add it a few times to the frame in between the paper layer and the one we added the pattern offset to.

Once you have them how you want them erase any that is outside the black portion of the frame

Change all the blend modes to luminosity

Merge them together

Lower the opacity to 50%

Add your full tube to your canvas now

Resize and reposition to your liking

Once you have this

Filer → Xero → Porcelain

All at default except the blue channel change to 0

Filer → Sharpen → Unsharp Mask

All at default

Duplicate this layer

On the bottom on add a drop shadow

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

Element5

Element5

Element 39 (this is over the frame and I erased any that was outside the frame as well, no drop shadow)

Element24

Element29 (erase some of this)

Element12

Element38

Element40

Element8

Element40

Add your name

Erase a bit of it so it looks like it's wrapping around her foot

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on May 18^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Elias Chatzoudis

You must purchase a license to use his work and can do so HERE

Scrapkit of Choice

I am using a part of the birthday collab at SATC, this is Bibi's Collection's part

It was a freebie if you spent a certain amount but, you can still buy this and there are plenty of goodies in this collab

You can find this collab HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Elements (7)

Add to your canvas

Resize to 85%

Add a drop shadow

Open Papers (4)

Resize to 600px by 600px

Add to you canvas below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection

On the paper layer, press delete

Deselect

Open Elements (19)

Add to you canvas

Resize and reposition to your liking

Duplicate this layer and reposition a bit

Open Papers (1)

Select the element so that you have the marching ants around it

Invert the select, on the paper layer, press delete

Change the blend mode to color

Deselect

Add your tube to the canvas

Resize and reposition to your liking

Erase any of the tube that may be outside the frame by her legs

Duplicate the layer

Have one above and one below the frame

On the one below add a drop shadow

On the one above, duplicate it

Filter → Blur → Gaussian Blur, 3.0 px

Change the blend mode to soft light

Add your close up in between the frame and paper

Resize and reposition as you'd like

Erase any that may be outside the frame

Change the blend mode to soft light

Open Papers 1

Resize to 600px by 600px

Add to your canvas just above the white background

I applied a bokah effect mask here

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

ELEMENTS (10)

ELEMENTS (29) – no drop shadow

ELEMENTS (15) – added an outer glow as well

ELEMENTS (22)

ELEMENTS (22)

ELEMENTS (9)

ELEMENTS (5)

ELEMENTS (16)

ELEMENTS (3)

ELEMENTS (6)

ELEMENTS (1)

ELEMENTS (37) – no drop shadow

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on June 27^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Michael Calandra

You must purchase a license to use his work and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Happy Birthday to me” by Designs by Sarah

You can find this kit HERE

Mask of Choice

I am using Mask141 by Weescotslass Creations

You can find this mask for download HERE

Addiontal Filters

VanDerLee - Unplugged-X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame 3

Add to your canvas

Resize to 80%

Rotate -45 degrees

Add a drop shadow

Open pp8

Resize to 600px by 600px

Add to your canvas below your frame

Use the magic wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection and on the paper layer press delete

Open pp5

Resize to 600px by 600px

Add to the canvas just above the white background layer

Apply the mask to this layer

Open your tube and get the full body one

Add to your canvas, resize and reposition to your liking, above the frame

Once you have it where you want it

Duplicate it

On the bottom one add a drop shadow

On the top one

Filter → Blur → Gaussian Blur, 3.0 px

Change the blend mode to soft light

Add your close up to now in between the frame and the paper background

I added it twice and flipped one horizontally

Change the blend modes to luminosity and lower the opacity to 30%

Duplicate the black background layer and bring it above these two layers we just added

Filter → VanDerLee → Unplugged-X → Pattern Offset

Change the blend mode to soft light

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

candy 2

beads (no drop shadow)

back drop 1 (no drop shadow)

party hat

ribbon 6

candle 1

drink 1

cupcake 1

flower 2

flower 1

present 1

present 2

bow 3

bow 3

Add some wordart if you'd like to

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on June 27^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Zindy

You must purchase a license to use her work and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Belle” by Rissa's Designs

You can find this kit HERE

Mask of Choice

I am using Mask363 by Vix

You can find this mask for download HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open RD20

Add to your canvas

Resize to 80%

Rotate -5 degrees

Add a drop shadow

Open RDPP05

Resize to 600px by 600px

Add to your canvas below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection

On the paper layer, press delete

Open RDPP01

Resize to 600px by 600px

Add to your canvas below the other paper layer we just added

Apply your mask to this layer

Open your tube and add to your frame

Resize and position to your liking so that it looks like she's in the frame

Erase any that is outside the frame, I left the hair on the left side alone though

Duplicate this layer

On the bottom, have it below the frame and add a drop shadow

On the top one, erase any that you might've missed before

Duplicate this layer

On the duplicate

Filter → Blur → Gaussian Blur, 3.0 px

Change the blend mode to soft light

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

RD09 (I added an outer glow here as well)

RD02

RD05

RD07

RD03

RD21

RD21

RD22

RD18

RD19

RD13

RD23

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on May 9^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Gina King

You must purchase a license to use this tube and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Wanna Lick?” by Designs by Sarah

You can find this kit HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Frame 4

Add to your canvas

Resize to 80%

Duplicate

Rotate the bottom on 10 degrees

Rotate the top on -10 degrees

Add a drop shadow to both of them

Open pp5

Resize to 600px by 600px

Add to your canvas below the frames

Use your magic wand to select inside of both the frames

Select → Modify → Expand, by 5

Invert the selection

On the paper layer press delete

Deselect

Open your tube and add the one with the Popsicles behind her if you're using the same tube as me

Erase any that is outside the frames

Duplicate this layer

Change the bottom one's blend mode to luminosity

Change the top one's blend mode to soft light

Add your tube this time without the Popsicles, if you're using the same image as me again :)

Flip the image horizontally

Resize and position to your liking

Once you have this duplicate it

On the bottom one add a drop shadow

On the top one

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

Open back drop 1

Add this to your canvas just above the white background layer

Rotate 90 degrees counterclockwise

Resize and adjust the position a bit if you're wanting to

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

sun

waves

string 1 (no drop shadow)
sun glasses 2

popscicle 1

popscicle 4

wordart 1 (I also added an outer glow here)

heart

button 2

button 2

button 1

button 1

flower 1

little flower 1

little flower 2

bow 1

bow 2

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on June 26^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Keith Garvey

This is a Free Tube and you can snag it HERE

Scrapkit of Choice

I am using a FTU kit called “Seductress” by Designs by Sarah

You can find this kit HERE

Mask of Choice

I am using Mask340 by Weescotslass Creations

You can find this for download on her blog HERE

I also used a heart brush, I can't remember where I got this one but, there are lots of heart brushes out there if you're wanting to add the little hearts as well :)

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame 2

Scale down to 70%

Add a drop shadow

Open pp4

Resize to 600px by 600px

Add to the canvas below the frame

Use the magic wand to select inside the middle circle

Select → Modify → Expand, by 3

Invert the selection and on the paper layer, press delete

Open pp3

Resize to 600px by 600px

Add to the canvas below the other paper we just added

Apply the mask here

Add the tube to your canvas

Resize and reposition to your liking

Duplicate this layer

Have one above and one below the frame

Erase any of the tube that is outside the frame background at the bottom

on the bottom one add a drop shadow

Duplicate the top one

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

Open the element print

Add to your canvas just above the frame background

Change the blend mode to Multiply

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

tag 1

bow

flower 2

flower 1

Add some wordart if you'd like

Add a new layer if you're wanting to add the small hearts and just randomly add them to your canvas

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on June 25^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ismael Rac

You must purchase a license to use his work and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Starlite Night” by Alika's Scraps

You can find this kit HERE

Mask of Choice

I am using Mask363 by Vix

You can find this for download on her blog HERE

Additional Filters Needed

Penta.com - Dot and Cross

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open as19

Add it to your canvas

Resize by 80% and rotate -5 degrees

Add a drop shadow

Open paper01

Resize to 600px by 600px

Add to your canvas below the frame

Use your magic wand tool to select inside the frame

Make sure you get as much of the little spaces around the edges as you can

Select → Modify → Expand, by 5

Invert the select

On the paper layer, press delete

Deselect

Duplicate this layer

Filer → Penta → Dot and Cross

Amount – 25

Cross distance – 10

Cross width – 0

Change the blend mode to soft light

Open paper07

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add your tube to the canvas as the top layer

Resize and position to your liking

Duplicate this layer

On the bottom one add a drop shadow

On the top one

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

Add your tube again, this time have it between the frame and the two paper layers we had there

Resize and position as you'd like

erase any that is outside the frame

Change the blend mode to luminosity and the opacity to 30%

Open as26

Add to your canvas just below the last tube we added

Resize and position to your liking, I went in the top right corner

Duplicate this once you have it where you want it and drag one layer just below the two background papers

On the one above them still

Erase any that's outside the frame

Change the blend mode to overlay

On the one below the frames, duplicate it once more

Rotate and position behind the tube in the bottom left as well

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

as15 (no drop shadow)
as10

as13

as21

as12

as14

as08

as25

as08

as21

as05

as04

as03

as02

Add some wordart if you'd like

as30 (no drop shadow)

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

Now, if you want to animate like I did:

Duplicate both of the star layers

On the bottom ones desaturate them

Hide both of the full color ones

That's your first frame

Your second frame unhide the yellow star layer and have the opacity at 25%

On the third change the opacity to 50%

On the fourth change the opacity to 75%

On the fifth change the opacity to 100%

Add another and don't change anything

Add another change the opacity back to 75%

Add another change the opacity back to 50%

Add another change the opacity back to 25%

On the next layer they're both going to be hidden once again

Add a new layer and repeat the above with the purple heart

Press play to see your animation go

If you're happy with it, You're done!

Save as a .gif

~~Click on Sample to view full size~~
This Tutorial was written on June 23^rd, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Enys Guerrero

You must purchase a license to use his work and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Bella's Lullaby” by Pimp'd Designs

You can find this kit HERE

Mask of Choice

I am using PTUMask10 by Vis

You can find this for purchase HERE

Additional Filters Needed

Vanderlee – Unplugged X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame-02

Add to your canvas

Resize to 70%

Add a drop shadow

Open pp02

Add to your canvas below the frame

Use your magic wand tool to select inside the frame

Select → Modify → Expand, by 5

invert your selection

On the paper layer, press delete

Deselect

Duplicate the paper layer

Filer → VanDerLee → Unplugged-X → Pattern Offset

Change the blend mode to soft light

Open bellas-lullaby-sheet

Add to your canvas just below the frame layer but above the two background layers we just made

Resize and rotate a bit to your liking

Ctrl + Click on the thumbnail in the layer pallate of one of the backgrounds to select it

Invert the selection and on the sheet music layer, press delete

Deselect

Change the blend mode to Multiply

Open your tube and add to your canvas

Resize and reposition to your liking

Once you have this duplicate it and have one above and one below the frame

The one below erase any that is extending outside the frame that you don't want to be

Add a drop shadow

On the one above erase the same parts you did from the other layer and then any that is over the frame that you don't want over the frame either.

Duplicate this layer

On the bottom one add a drop shadow

On the top one

Filter → Blur → Gaussian Blur, 3.0 px

Change the blend mode to soft light, lower the opacity to 50%

Add the tube one more time

This time have it above the sheet music layer

Resize and position as you'd like

Once you have that erase any that may be extending beyond the frame

Change the blend mode to luminosity, lower the opacity to 50%

Open pp10

Add to your canvas just above the white background layer

Apply the layer mask here

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

music-notes (no drop shadow)

swirl

ribbon-charmed

music-note

flower-01

music-note

flower-02

flower-04

bow-01

bow-01

old-book

music-note

bow-03

bow-02

butterfly

butterfly

flower-03

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!