~~Click on Sample to view full size~~
This Tutorial was written on May 9th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Zlata_M

You must purchase a license to use her tubes and can do so HERE

This particular tube was a quest item. Look at the quests on the PFD site to see how you could get it as well :)

Scrapkit of Choice

I am using the “Magnolia” Mini by ChiChi's Designz

You can find this HERE

Mask of Choice

I am using Mask5 by Melissa's Creationz

You can find this for download HERE

Additional Filters Needed

PhotoEffex - Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Frame1

Add to your canvas

Resize by 60%

Duplicate Twice

On the middle one desaturate

Rotate the bottom two a bit

Each going opposite directions

Merge all three together

Add a drop shadow

Open Paper5

Resize to 600px by 600px

Add to your canvas

just below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection

On the paper layer press delete

Duplicate this layer

Filter → PhotoEffex → Scanlines

All at default, except the width, change to 3

Change the blend mode to soft light

Open Paper2

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking

Duplicate this layer

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to screen

To the bottom tube add a drop shadow

Add your tube once more between the two frame background paper layers

Erase any of the tube that's outside the frame

Change the blend mode to Luminosity

Lower the opacity to 80%

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

LaceBrush (no drop shadow)

Leaves

Vine

Branch

Ribbon

1

Teapot

4

4

4

Swan

3

Butterfly

Butterfly

Sparkles (no drop shadow, erase what's over the tube, duplicate twice)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on March 5th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Zlata_M

You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice

I am using “Funny Valentine” by Candy's Treats

You can find this HERE

Mask of Choice

I am using Mask84 by Weescotslass Creations

You can find this HERE

You'll also need a heart shape, I used a brush or you can use the heart preset shape that just comes with the program

Additional Filters Needed

VanDerLee – Unplugged-X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Bracket

Add to your canvas

Resize down by 80%

Rotate -25 degrees

Add a drop shadow

Duplicate this layer

Flip Horizontal, Flip Vertical

Arrange a bit apart sort of like my sample tag

Open P7

Resize to 600px by 600px

Add to your canvas below the two brackets

Add a new layer and either draw out, stamp or add the heart you're going to be using

Drag below the paper layer

Hold down your alt key and on the layer pallette move your mouse between the two layers until the cursor changes into the two intersecting circles and click once

Move around and resize the heart as you'd like to

I also added a bevel and outer glow

Add a Drop shadow

Open P3

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Duplicate

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

Lower the opacity to about 50%

On the bottom tube

Add a drop shadow

Add the tube once more

Just above the pink paper we used for the heart we made

I flipped mine horizontally

I made the clipping mask as I did before (with the heart and paper layers)

Change the blend mode to luminosity

Lower the opacity to 30%

Duplicate the paper layer (you may need to readd the clipping mask)
Filter → VanDerLee → Un-plugged-X → Pattern Offset

Change the blend mode to soft light

In a nice cursive font type out the letters ily in white

Add a bevel, slight inner glow, outer glow and drop shadow

Change Rotate to match the brackets

Change the blend mode to soft light

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

Stormbg1 (no drop shadow)

Stormbg1 (no drop shadow)

Gems-pink

ribbon3

tag

Greenery2

elesmall4

heart1

heart2

ele7

Stud

ele3

elesmall1

Stormbow1

Stormbow4

ValentineButterfly1

LilacButterfly

Stud

Stud

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on August 23rd 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Zlata_M

You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice

I am using “Firework” by Designs by Sarah

You can find this for purchase HERE

Mask of Choice

I am using Mask141 by Weescotslass Creations

You can find this for download on her blog HERE

Additional Filters Needed

VanDerLee – Unplugged-X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame 1

Add to your canvas

Resize down to 80%

Rotate -10 degrees

Add a drop shadow

Open pp1

Resize to 600px by 600px

Add to your canvas below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection and on the paper layer press delete

Duplicate this layer

On the duplicate

Filter → VanDerLee → Unplugged-X → Pattern Offset

Change the blend mode to soft light

Open pp5

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Move this one below the frame

Erase any of the tube that's outside the frame at the bottom

Duplicate

Move this one above the frame

Select the frame layer

Erase any of the tube that's over the frame

Duplicate this layer

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

Lower the opacity to 60%

Add a drop shadow to the bottom tube layer

Add your tube to your canvas below the frame in between the two paper layers

Resize and reposition to your liking

Erase any that's outside the frame

I did this in each of the two frames around the main tube

Change the blend modes to luminosity

Lower the opacity of both of them to 50%

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

candy 2

star 1

firework 1 (no drop shadow)

star 2

ribbon 4

stars 3

string

stars 1

sparkler

sparkler

stars 2

bow 2

word art 3 (added a bit of an outer glow to this one)

beads

button 1

button 2

button 1

tag

word art 1

charm

button 2

flower 5

flower 4

flower 3

cupcake

sparkles

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on March 25^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

Tube of choice.
I am using the artwork of Zlata_M

Use must purchase a license to use her artwork and can do so HERE

This tube is a prepaid exclusive they did but, she has plenty of other awesome tubes if you didn't get it :)

Scrapkit of Choice

I am using a PTU Kit, “Sweet Kisses” by Bibi's Collection

Which you can find for purchase HERE

You'll also need an optional sparkle from another kit :)

Mask of Choice

I am using Mask366 by Weescotslass

Which you can find for download to use HERE

Additional Filters

Xero – Porcelain

Xero - Radiance

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open ELEM (58)

Add to your canvas

Add a drop shadow

Open Papers (7)

Resize to 600px by 600px

Add to your canvas

Have this below the heart frame we're using

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection and on the paper layer, press delete

Get your tube the way you want it and add it to your tag

Resize and position it how you're wanting it add a drop shadow

Filter → Xero → Porcelain

All at default, except the blue channel set to 0.

Filter → Xero → Radiance

Sometihng very subtle that just adds a bit of light background

Filter → Sharpen → Unsharp Mask

All at default

Add your tube again in between the paper layer and the frame

Flip it horizontally and resize and position.

Erase any that is outside the heart frame

Change the blend mode to luminosity

Open Papers (3)

Resize to 600px by 600px

Add to your canvas just above the white background

Apply the mask to this layer

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

ELEM (6) – (no drop shadow)

ELEM (6) – (no drop shadow)

ELEM (3) – (no drop shadow)

ELEM (2) – (no drop shadow)

ELEM (17) – (no drop shadow)

ELEM (20) – (no drop shadow)

ELEM (20) – (no drop shadow)

ELEM (16) – (no drop shadow)

ELEM (16) – (no drop shadow)

ELEM (17) – (no drop shadow)

ELEM (17) – (no drop shadow)

ELEM (21) – (no drop shadow)

ELEM (91)

ELEM (74) – (no drop shadow)

ELEM (27) – (just 1 of them)

ELEM (94)

ELEM (90)

ELEM (26) – (no drop shadow)

ELEM (27) – (just 1 of them)
ELEM (17) – (no drop shadow)

ELEM (16) – (no drop shadow)

ELEM (64)

ELEM (27) – (just the big one)

ELEM (99)

ELEM (99)

ELEM (82)

ELEM (83)

ELEM (94)

ELEM (74) – (no drop shadow)

ELEM (47) – (just 1 of them)

ELEM (47) – (just 1 of them)

ELEM (16) – (no drop shadow)

Add that optional other sparkle here if you'd like to :D

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're not wanting to animate....

If you're happy with you're result save to your liking and you're done!

If you're wanting to animate....

Open ELEM (74)

Add it to your tag and position it inside the frame

I added an outer glow to mine to make it pop just a bit more

Once you have it where you want it

Rotate it so that it looks like a flat kiss coming from the tube

Resize down a bit too, I did mine around 73%

Duplicate this layer 8 times so you end up with a total of 9 layers

On the first copy scale down by 90%

On the second 80%

On the third 70%

On the fourth 60%

On the fifth 50%

On the sixth 40%

On the seventh 30%

On the eighth 20%

Reposition if you're needing to a bit, to get the ALL to move make sure you highlight all 9 layers and then move and it'll reposition it all.

Now hide all of the layers except for the smallest lip kiss.

We're going to go to the animation window.

Have the delay set to .15 sec and to repeat forever.

Add a new layer and hide the first layer we used and unhide the next biggest

Keep adding layers and going up until we're too our biggest lips

Leave that one open and add a new layer after it change the blend mode to 90%

Add another and change the blend mode to 80%

Keep adding layers and lowering it by 10 until you're at 10%

Once you add another one just hide it completely and change the delay to .5 sec

Press play to see your animation go and if you're happy with it you're done!!

Save as a .gif and Way to go!!

~Here's the unanimated version~

~~Click on Sample to view full size~~
This Tutorial was written on March 20^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

Tube of choice.
I am using the artwork of Zlata_M

Use must purchase a license to use her artwork and can do so HERE

Scrapkit of Choice

I am using a PTU Kit, “Cupcake Surprise” by PolkaDot Scraps

Which you can find for purchase HERE

Mask of Choice

I am using Mask366 by Weescotslass

Which you can find for download to use HERE

Additional Filters

Xero – Porcelain

Xero - Radiance

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame2

Add to your canvas

Scale down to 60% and rotate -10 degrees

Open paper7

Resize to 600px by 600px

Add to your canvas below your frame

Resize it down quite a bit so you have a bit more of the stripe effect in the middle if you want.

Use your magic wand and select inside the frame

Select → Modify → Expand, by 5

Invert the selection and on the paper layer press delete.

Open paper12

Resize to 600px by 600px

Add to your canvas below the other paper layer

Apply your layer mask here.

Add your half body tube to your canvas

Position it to your liking, once you're happy with that, duplicate the layer

Drag one below your frame and add a drop shadow

On the one above the frame, erase any that hanging over the bottom portion of the frame.

Filter → Xero → Porcelain

All at default except the blue channel slide to 0.

Filter → Xero → Radiance

Something subtle that just brightens your tube back up a bit.

Filter → Sharpen → Unsharp Mask

All at default.

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

doodlestem (no drop shadow)

leaves1

string3

flower5

string2 (no drop shadow)

flower5

gems1 (just one of them)

gems1 (just one of them)

gems1 (just one of them)

button1

button1

button1

flower1

cupcake3

cupcake1

flower3

flower4

ribbon5

ribbon5

Add some sparkles if you'd like to (this is optional and I got mine from another kit)

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February 14^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

Tube of choice.
I am using the artwork of Zlata_M

You may purchase a license to use her work HERE

Kit of choice.
I am using a Scrapkit called, “Love is in the Air” by Mythical Designs

Which you can purchase for use HERE

Mask of Choice.

I am using FloraMask8 by Reika Rafita

Which you can find HERE

It's the 6th one down, set2

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

flood fill with white

Open Paper1

Resize to 600px by 600px

Add to your canvas

Take your preset shape tool and choose the 'Heart Card' shape

With the color set to black Draw out a good sized heart and then move it below the paper layer

Hold down the alt key and when your in your layers pallate move the pointer between the shape and paper layer until is switches to the two layers and click once.

Merge these two layers together.

Select the layer

Select → modify → contract, by 25

Select → modify → smooth, by 10

press delete.

Deslect

Add a bevel to this layer now, softening it up.

Ctrl + Click on this layer to select it again

Add a new layer and move it below the frame we've made

Select → Modify → Expand, by 5

Flood fill with color of choice

Deselect

Add noise of choice to this layer.

Merge the layers together

Resize this heart and rotate to the left, I did about 18 degrees.

Add a drop shadow of choice.

Open Paper7

Resize to 600px by 600px

Add to your canvas below your frame layer

Use your magic wand to select inside of your frame layer

Select → Modify → Expand, by 5

Invert your selection and on the new paper layer press delete.

Open Paper8

Resize to 600px by 600px

Add to your canvas and move just above the white frame

Add your mask to this paper layer.

Add your tube now, resize and position to you liking.

Make it look like she's sort of sitting on the edge of the frame

Once you're happy with that duplicate the layer.

On the bottom add a drop shadow

On the top one

Filter → blur → gaussian blur, 3.0

Change the blend mode to soft light.

Add the tube a couple of more times between the frame and the background layer

Change the blend mode to luminosity and the opacity to 20%

Open the Alphas for L, O, V, E

Add then to your tag, resizing and changing the angle to how you want them

You can use mine as a sample to follow.

Merge the 4 letters together

Add and outer glow to your letters and a drop shadow

in a pixel font add is in the air and place just below it as you'd like to.

Now we're just going to embellish the tag

Do so to your liking with drop shadow of choice

Resized and positioned where you want.

I used the following with a drop shadow unless specified.

Element23 (no drop shadow)

Element23 (no drop shadow)

Element12

Element8 (no drop shadow)

Element7 (no drop shadow)

Element20

Element10

Element15 (no drop shadow)

Element6

Element5

Element16 (no drop shadow)

Element33

Element9

Element9

Element13

Element22 (no drop shadow)

Element36

Add your name

Image → Trim

Top left pixel color, all boxes checked

Resize if you'd like to

*****Most Important*****

Add your copyright information

If you're happy with your results save to your liking and if you don't want to animate you're done!!

If you DO want to animate though let's keep going.

Now we're going to go to The layer in our pallate where the Element22 is.

Go ahead and duplicate it twice so that you have 3 of the layer.

On the two new ones, move them around to new positions on the canvas that still look good.

Go ahead and rehide the top two, just leaving the original one showing.

We're going to go to our animation window, set the delay on this animation to .1 seconds and forever.

On our first frame change the opacity of our bottom sparkles layer to 50%

Add a new animation layer and change opacity to 60%

Add a new animation layer and change opacity to 70%

Add a new animation layer and change opacity to 80%

Add a new animation layer and change opacity to 90%

Add a new animation layer and change opacity to 100%

Add a new animation layer and change opacity to 90%

Add a new animation layer and change opacity to 80%

Add a new animation layer and change opacity to 70%

Add a new animation layer and change opacity to 60%

Add a new animation layer and change opacity to 50%

On this same layer click on the eye icon next to the second sparkles layer to unide it and change the opacity to 10%

Add a new animation layer on the first sparkles layer change the opacty to 40% and on the second 20%

Add a new animation layer on the first sparkles layer change the opacty to 30% and on the second 30%

Add a new animation layer on the first sparkles layer change the opacty to 20% and on the second 40%

Add a new animation layer on the first sparkles layer change the opacty to 10% and on the second 50%

Now, hide your first sparkles layer and continue just like we did with the first layer on the second and then when you need the next layer unhide the last sparkle layer and use it and repeat the process but, instead of adding a new layer when you'd get back down to when you need to bring in the new layer, go back to the very first frame and add the third sparkle to it but, set at 10%

Press play to see your sort of fading in and out sparkle effect.

If you're happy with what you've done then save as a .gif and you're done!!!

Here is a sample of the non animated one :)
 

~~Click on Sample to view full size~~
This Tutorial was written on January 11th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

Tube of choice.
I am using the artwork of Zlata_M

This is an exclusive tube at Pics For Design.

You would need to purchase a membership to their exclusive club and you'll get 4 exclusives for 1 month

You can view Zlata's other works HERE

Kit of choice.
I am using a Scrapkit called, “I [heart] Johnny” by Designs By Sarah

You can find this HERE

Mask of Choice.

I am using Mask99 by Weescotslass

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

flood fill with white

Open frame 3

Resize by about 75%

Duplicate

On the bottom one rotate -8 degrees

Adjust to black and white

Merge these two layers together, add a drop shadow of choice.

Open pp5

Resize to 600px by 600px

Paste into your canvas

Use your magic wand and select inside your frames

Select → Modify → Expand by 5, invert the selection and on the paper layer press delete.

Open pp9

Resize to 600px by 600px

Paste into your canvas

Drag to just above the white background layer

Apply the layer mask here.

Open your tube and merge the layers you're wanting on your tube together.

Drag over to your canvas.

Resize and reposition to your liking.

Duplicate this layer.

(they should both be the top two layers)

The bottom one add a drop shadow

The top, Filter → Blur → Gaussian blur, 3.0

Change the blend mode to soft light.

Now we're just going to embellish the tag

Do so to your liking with drop shadow of choice.

I used the following from the bottom up, with a drop shadow unless stated

mud splat 1 (no drop shadow)

mud splat 1 (no drop shadow)

heart 2 (no drop shadow)

ribbon 5

heart 2 (no drop shadow)

bow 2

button 2

button 2

button 3

button 3

word art 2 (outer glow added as well)

heart 1

flower 2

bow 4

Add your name

Image → Trim

Top left pixel color, all boxes checked

Resize if you'd like to

*****Most Important*****

Add your copyright information

If you're happy with your results save to your liking and you're done!!

~~Click on Sample to view full size~~
This Tutorial was written on January ^9th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

Tube of choice.
I am using the artwork of Zlata_M

Which you can purchase for use HERE

Kit of choice.
I am using a Scrapkit called, “Happy new year” by Designs By Sarah

You can find this HERE

Mask of Choice.

I am using BigMask008 by Vix

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

flood fill with white

Open pp9

Resize to 600px by 600px

Copy and paste into your canvas

Select your custom shape tool

Find the shape, “Flower 2 Frame”

(you may need to load your preset shapes. To do this click the small arrow on the right, All, Append)

With your foreground set to black, draw out a good sized flower frame shape

Move this layer below your paper

Hold down alt and in your layers pallate, move your mouse between the two layers, once in changes to the three circle right click your mouse once to create a clipping mask.

Merge these two layers together.

Ctrl + Click on the frame layer.

Select → Modify → Expand, by 3

Add a new layer below the frame layer

Flood fill with a color from your paper frame.

Deselect.

Filter → Noise → Add Noise

25%, Gaussian, Monochromatic

Add a drop shadow to this layer

To the paper frame layer

Add a bevel and emboss, check contour as well, soften to about 15 px.

Merge those two layers together.

Open pp12

Resize to 600px by 600px

Paste into your canvas

Drag below your frame

Use your magic wand to select inside of your frame

Select → Modify → Expand, by 5

Invert your selection and on the new paper layer, press delete.

Deselect.

Open pp2

Resize to 600px by 600px

Drag to just about your white background

Apply your mask to this layer

Add your tube to your canvas.

Resize and reposition to your liking.

Once you like where it's at, duplicate this layer

Have one just above and one just below the frame

Hide the one above for now.

Erase any parts of the tube that are below the frame

Add a drop shadow

Unhide the top tube layer

Erase any parts that are below the frame as well as over the frame

Duplicate the tube

On the top one

Filter → Blur → Gaussian Blur, 3.0

Change the blend mode of this layer to soft light

Now we're just going to add the elements to the tag

Do so to your liking, resized and positioned as you want

I used the following from the bottom up, with a drop shadow unless specified

dots 2 (no drop shadow)

dots 2 (no drop shadow)

swirl 1 (no drop shadow)

stars 1

clock

bow 1

button 6

button 4

button 4

flower 4

button 1

button 1

flower 3

flower 3

flower 5

flower 2

champagne glass

button 6

sparkles (no drop shadow)

sparkles (no drop shadow)

Add your name

Image → Trim

Top left pixel color, all boxes checked

Resize if you'd like to

*****Most Important*****

Add your copyright information

If you're happy with your results save to your liking and you're done!!

I am using Witches Brew by Designs by Sarah @ PMTW/S