Followers

Snag My Blinkie

Chat Box

Blogs I Love

Candy's Treats
Karra's Kreative Korner
Tasha's Playground

Proud Member

Pimpin' Pspers
Creative Addictions
Creative Misfits

Blog Awards

Friday, May 31, 2013


~~Click on Sample to view full size~~
This Tutorial was written on May 30th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Keith Garvey
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using a scrapkit by ChiChi Designs it's the kit that matches “SoniaRoji 4-2”
You can find this HERE

Mask of Choice
I am using BigMask001 by Vix
You can find this for download HERE

Additional Filters Needed
Penta - Jeans

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame1
Add to your canvas
Resize by 70%
Rotate by 8 degrees
Add a drop shadow

Open paper3
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 6
Invert the selection
On the paper layer press delete
Duplicate this layer
Filer → Penta → Jeans
All at deafult
Change the blend mode to soft light

Open paper5
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the botttom tube add a drop shadow

Add the close up in between the two paper layers
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Tree
Vines
Scattered (no drop shadow)
FireFlies (no drop shadow, add an outer glow)
Grass
Flowers
Flower
Butterflies (just one)
Butterflies (a different one)
Sparkles (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


Wednesday, May 22, 2013

~~Click on Sample to view full size~~
This Tutorial was written on May 22nd 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Myka Jelina
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using “Rustic Grunge” by Rissa's Designs
You can find this HERE

Mask of Choice
I am using Mask84 by Weescotslass Creations
You can find this for download HERE

Additional Filters Needed
Xero - Porcelain

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame2
Add to your canvas
Resize by 80%
Add a drop shadow

Open paper2
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 7
Invert the selection
On the paper layer press delete

Open paper1
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Filter → Xero → Porcelain
All at default, except blue channel change to 0
Add a drop shadow

Add the close up just below the frame
Erase any that's outside the frame
Change the blend mode to soft light

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Glass (no drop shadow)
lamp
Splatter (no drop shadow)
Splatter (no drop shadow)
Swirl
Swirl
Ribbon2
Curtain
Key2
Tag
Heart
Heart
Watch
Skull
Sparkles (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!




~~Click on Sample to view full size~~
This Tutorial was written on May 22nd 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Amy Matthews
You must purchase a license to use her tubes and can do so HERE
This was a bonus tube but be sure to check out all her awesome tubes at CDO

Scrapkit of Choice
I am using “May Flowers” by Alika's Scraps
You can find this HERE
It's a fan freebie Mini Kit so be sure to like her page and snag this freebie!

Mask of Choice
I am using Mask141 by Weescotslass Creations
You can find this for download HERE

Additional Filters Needed
PhotoEffex – Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open as10
Add to your canvas
Duplicate the frame on the right and then erase it from the bottom
(so you have each frame on a separate layer)
Resize both by 80%
Arrange on your canvas similar to mine
Add a drop shadow

Open paper03
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 3
Invert the selection
On the paper layer press delete
Filter → Blur → Motion Blur
Angle – 25 degrees, Distance – 96 Pixels
Duplicate 3 times (so there are four of the same layer)
Merge all of them together
Use your magic wand to select inside the frame
Select → Modify → Expand, by 3
Invert the selection
Press delete
Deselect

Duplicate this layer
Filer → PhotoEffex → Scanlines
All at default, change the width to 3
Change the blend mode to soft light

Open paper01
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Move below the frame
Erase any of the tube that's outside the frame at the bottom
Duplicate this layer
Move above the frame, erase any of the tube over the bottom of the frame
Duplicate this layer
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to Soft light
To the bottom tube add a drop shadow

Add the close up to the other frame, in between the two paper background layers we made
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

as03 (no drop shadow)
as08 (no drop shadow)
as08 (no drop shadow)
as02
as09
as07
as04
as05
as01
as01
Sparkles of choice (I got mine from Alika's Total Zirconia kit :) )

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!




~~Click on Sample to view full size~~
This Tutorial was written on May 21st 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Keith Garvey
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using “Memories” by Amy Marie's Kits
You can find this HERE

Mask of Choice
I am using Mask5 by Melissaz Creationz
You can find this for download HERE

Additional Filters Needed
None

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open 58
Add to your canvas
Resize the height only by 80%
Add a drop shadow

Open pp010
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 3
Invert the selection
On the paper layer press delete

Open pp6
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Move below the round frame
Erase any of the tube that's outside the frame at the bottom
Duplicate this layer
Move above the frame, erase an of the tube over the bottom of the frame
Duplicate this layer
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

46 (no drop shadow)
46 (no drop shadow)
45 (no drop shadow)
45 (no drop shadow)
92
93
32
32
105
105
10
81
1
33
53
50
14
16
11
15
1
1
54
54
54
12
104
104
47
98
106 (no drop shadow)
106 (no drop shadow)
106 (no drop shadow)
106 (no drop shadow)
30
30

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


Monday, May 20, 2013

~~Click on Sample to view full size~~
This Tutorial was written on May 20th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ana Neves
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using the matching kit to the tube “Lavendar Sunrise” by Gothic Inspirations
You can find this HERE

Mask of Choice
I am using Mask84 by Weescotslass Creations
You can find this for download HERE

Additional Filters Needed
PhotoEffex - Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame5
Add to your canvas
Resize by 65%
Rotate -10 degress
Add a drop shadow

Open Frame3
Add to your canvas
Resize by 76%
Add a drop shadow

Open Paper4
Resize to 600px by 600px
Add to your canvas
just below the round frame
Use your magic wand to select inside the round frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete
Duplicate this layer
Filter → PhotoEffex → Scanlines
All at default, except the width, change to 3
Change the blend mode to soft light
Move these two paper layers below the other frame in the layers pallate

Open Paper3
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Open WordScatter and add to your canvas a couple of times
Select your mask layer
Delete any of the WordScatter that is outside of the mask area
Change the blend modes to soft light

Add your tube to your canvas, resize and reposition to your liking
Move below the round frame
Erase any of the tube that's outside the frame at the bottom
Duplicate this layer
Move above the frame, erase an of the tube over the bottom of the frame
Duplicate this layer
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to screen
To the bottom tube add a drop shadow

Add Doodle1 to your canvas
In between the two purple round frame background layers
Erase any of the doddle that's outside the frame


Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Scatter (no drop shadow)
Doodle2 (no drop shadow)
Flower4
Flower4
Flower4
Flower4
Leaves2
DriedFlower2
Envelope
Flower3
Lamp
Book
Flower5
WordArt3 (erase the part that's over the tube, no drop shadow)
Bucket
Flower7
Flower7
Butterflies (use just one)
Butterflies (again use just one)
Sparkles (no drop shadow)
Sparkles (no drop shadow)
Leaves3 (no drop shadow)
Leaves3 (no drop shadow)
Grass
Pendant
Pendant
DriedFlower1
Flower7
Flower7
Sparkles (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!

Thursday, May 9, 2013

~~Click on Sample to view full size~~
This Tutorial was written on May 9th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Zlata_M
You must purchase a license to use her tubes and can do so HERE
This particular tube was a quest item. Look at the quests on the PFD site to see how you could get it as well :)

Scrapkit of Choice
I am using the “Magnolia” Mini by ChiChi's Designz
You can find this HERE

Mask of Choice
I am using Mask5 by Melissa's Creationz
You can find this for download HERE

Additional Filters Needed
PhotoEffex - Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame1
Add to your canvas
Resize by 60%
Duplicate Twice
On the middle one desaturate
Rotate the bottom two a bit
Each going opposite directions
Merge all three together
Add a drop shadow

Open Paper5
Resize to 600px by 600px
Add to your canvas
just below the frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete
Duplicate this layer
Filter → PhotoEffex → Scanlines
All at default, except the width, change to 3
Change the blend mode to soft light

Open Paper2
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate this layer
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to screen
To the bottom tube add a drop shadow

Add your tube once more between the two frame background paper layers
Erase any of the tube that's outside the frame
Change the blend mode to Luminosity
Lower the opacity to 80%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

LaceBrush (no drop shadow)
Leaves
Vine
Branch
Ribbon
1
Teapot
4
4
4
Swan
3
Butterfly
Butterfly
Sparkles (no drop shadow, erase what's over the tube, duplicate twice)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


Monday, May 6, 2013

~~Click on Sample to view full size~~
This Tutorial was written on May 6th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Zindy S. D. Nielsen
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using “Lil Miss Ladybug” by Designs by Sarah
You can find this HERE

Mask of Choice
I am using Mask 141 by Weescotslass Creations
You can find this for download HERE
I am also using sparkles from another one of her Sarah's kits

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame 3
Add to your canvas
Resize by 70%
Add a drop shadow

Open pp6
Resize to 600px by 600px
Add to your canvas
just below the frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete

Open pp2
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Erase any of the legs that are over the frame
Duplicate this layer
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Add the close up of the tube just below the frame
I flipped mine horizontally
Change the blend mode to luminosity
Lower the opacity to 80%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

print 1 (no drop shadow)
print 1 (no drop shadow)
print 3 (no drop shadow)
ribbon 7
ribbon 5
greenery 1
bottle
button 1
bow 4
deco
greenery 1
flower 3
flower 2
greenery 1
flower 1
bow 3
add sparkles of your choice (no drop shadow)
bugs 1

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!




~~Click on Sample to view full size~~
This Tutorial was written on May 6th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Gabi Spree
This tube is called "I Want Your Skull"
You must purchase a license to use her tubes and can do so HERE

Addittional Filters
MuRa's Meister – Copies
Gregs Factory Output Vol. II – Pool Shadow
Xero - Fritillary

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 250px

Add your tube to your canvas
Filter → MuRa's Meister's → Copies
Wallpaper (Rotate)
All at default
Move it around just a bit until you get an image you like on the left side
Duplicate this layer

On the bottom one
Filter → Blur → Motion Blur
Angle of 25 and distance 375 pixels

Filter → Sharpen Edges
Filter → Sharpen More

On the top one change the blend mode to soft light

Merge these two layers together

Use your rectangular marquee tool to select the whole canvas
Add three new layers to the canvas
On the bottom one
Edit → Stroke
Center, 12 and the color of black

On the middle
Edit → Stroke
Center, 8, medium brown from tube

On top
Edit → Stroke
Center, 2, dark brown from tube

Deselect

On the bottom change the blend mode to overlay
On the middle one

Filter → Xero → Fritillary
With the following settings:



Add your tube to your canvas
Resize and Reposition on the right side
Once you're happy with where it's at
Duplicate
On the bottom add a drop shadow
On the top
Filter → Blur → Gaussian Blur, 3.0 px
Change the blend mode to soft light

Add your name

*****Most Important*****
Add your copyright

Go to the background layer and duplicate three times so you have a total of 4 layers

On the bottom of the four

Filter → Gregs Factory Output Vol. II → Pool Shadow
With the following settings:



On the remaining 3 repeat the same filter except add 30 to the diagonal on each one (so 80, 110 & 140)

Open your animation window
Have the delay set to .3 sec, and to go forever
Add a new window, hide the first animation layer and unhide the second
Do this for all layers just hiding the last and unhiding the next in line

Press play to watch it go, if you're happy with your result
Save as a .gif and you're done!!
(Ctrl + Shift + Alt + S)




~~Click on Sample to view full size~~
This Tutorial was written on May 5th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ellie Milk
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using “Spring Tide” by ChiChi's Designz
You can find this HERE

Mask of Choice
I am using Mask 113 by Designs by Vabys
You can find this for download HERE

Additional Filters Needed
VanDerLee – Unplugged-X – TV RBG

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open LeavesFrame
Add to your canvas
Resize by 90%
Add a drop shadow

Open Paper13
Resize to 600px by 600px
Add to your canvas
just below the frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete

Open Paper6
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Erase any of the legs that are over the frame
Duplicate this layer
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Duplicate the Paper frame background
Filter → VanDerLee → Unplugged-X → TV RGB
Change the blend mode to soft light

Above this layer add the Light element
No drop shadow
Erase any of the light rays that are outside the frame

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Path
Dupliate and flip this one horizontally and move it to the right just a bit.

~Start on the left side and only work there for now~

Ribbon
WateringCan
Flowers3
Flowers5
Flower5
Teapot
PinkDrink
CupCake
Flower7
Bow2
Bow2
Sparkles (no drop shadow)

Duplicate all of these layers
Flip horizontally and move to the right a bit
Move down below the tubes layers in the layers pallate
Move the bow layers a bit

Add Wordart3
Add a stroke as well as a drop shadow

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!



Sunday, May 5, 2013

~~Click on Sample to view full size~~
This Tutorial was written on May 5th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Keith Garvey
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using “Eve's Garden” by Alika's Scraps
You can find this HERE

Mask of Choice
I am using mask141 by Weescotslass Creations
You can find this for download HERE

Additional Filters Needed
Penta – ColorDot

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open as31
Add to your canvas
Resize by 90%
Add a drop shadow

Open paper05
Resize to 600px by 600px
Add to your canvas
just below the frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete

Open paper07
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your full tube to your canvas, resize and reposition to your liking
Duplicate this layer
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Add your tube a couple more times in between the frame and paper frame background layer
Merge them together
Change the blend modes to luminosity and lower the opacity to 60%

Duplicate the Paper frame background
Filter → ColorDot → Jeans
All at default
Bring this layer above the merge tubes layer
Change the blend mode to soft light

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

as29 (no drop shadow)
as29 (no drop shadow)
as43 (no drop shadow)
as46
as25
as25
as27
as20
as09
as35
as35
as13
as41
as16
as12
as19
as34
as10
as22
as38
add sparkles of choice

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!




~~Click on Sample to view full size~~
This Tutorial was written on May 5th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of VeryMany
You must purchase a license to use their tubes and can do so HERE

Scrapkit of Choice
I am using “Dazzling Denim” by Alika's Scraps
You can find this HERE

Mask of Choice
I am using mask84 by Weescotslass Creations
You can find this for download HERE

Additional Filters Needed
Penta - Jeans

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open as24
Use your rectangular marquee tool to select the top left frame
Copy and past onto your new canvas
Erase any of the bits of the other frame you didn't get before
Duplicate
Rotate 45 Degrees
Merge these two together
Resize by 85%
Add a drop shadow

Open paper08
Resize to 600px by 600px
Add to your canvas
just below the frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete

Open paper04
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your full tube to your canvas, resize and reposition to your liking
Duplicate this layer
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Add your tube a couple more times in between the frame and paper frame background layer
Merge them together
Change the blend modes to luminosity and lower the opacity to 50%

Duplicate the Paper frame background
Filter → Penta → Jeans
All at default
Bring this layer above the merge tubes layer
Change the blend mode to soft light

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

as18 (no drop shadow)
as18 (no drop shadow)
as29
as14
as04
as10
as23
as02
as09
as09
as14
as02
as01
as16
as22
as30 (no drop shadow)

Add your name
I used paper06 to 'color' the bottom name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!



Contributors

Search

I CT For

Categories