~~Click on Sample to view full size~~
This Tutorial was written on April 30^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of FourXsDesigns

Use must purchase a license to use her artwork and can do so HERE

Scrapkit of Choice

I am using a FTU kit called “Lovely” by Scrapity Scrap and More

You can find this kit HERE

Mask of Choice

I am using Mask218 by Weescotslass Creations

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open element (6)

Add to your canvas

Resize down to 60%

Add a drop shadow

Open paper (13)

Resize to 600px by 600px

Add to your canvas below the frame

use you wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection

On the paper layer, press delete

Deselect

Open paper (4)

Resize to 600px by 600px

Add to you canvas, below the other paper layer

Apply the mask to this layer

Add your full body tube to the canvas

Resize and position to your liking

Duplicate this layer

On the bottom one add a drop shadow

One the top one

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

Lower the opacity to 50%

Add the close up to to your canvas

Flip horizontally

Resize and position inside the frame

Erase any that may still be outside the frame

Change the blend mode to luminosity

Lower the opacity to 35%

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

element (63) – No drop shadow

element (15) – No drop shadow

element (15) – No drop shadow

element (68) – No drop shadow

element (62)

element (45)

element (41)

element (25)

element (55)

element (14)

element (34)

element (11)

element (36)

element (36)

element (52)

element (52)

element (79)

element (53) – No drop shadow

element (53) – No drop shadow

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 30^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Jakob Kramer

Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Maybe Forever” by Farrah's Designer Scraps

You can find this kit HERE

Mask of Choice

I am using Mask84 by Weescotslass Creations

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Frame2

Add it to your canvas

Resize to 80%

Open Paper4

Resize to 600px by 600px

Add it to your canvas, below the frame

Use your magic wand to select inside your frame, make sure you get all the little pieces it doesn't get around the leaves

Select → Modify → Expand, by 8

Invert the selection and on the paper, press delete

Deselect

Open Paper6

Resize to 600px by 600px

Add to your canvas below the other paper

Apply the mask to this layer

Open your tube and add it to your canvas

Resize and position to your liking

I flipped mine horizontally as well.

Duplicate this layer

Have one above the frame and one below

On the one below add a drop shadow

On the one above, erase and of the tube that is over the frame at the bottom

Duplicate this layer

Filter → Blur → Gaussin blur, 3.0 px

Change the blend mode to Soft light

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

Leaf3

Scatter2

Beads2

Sign1

Sign2

Charms2

Flower5

Flower5

Bow3

Bow3

Butterfly

Sparkle (no drop shadow, change the blend mode to overlay)

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 30^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Gary Rudisill

Use must purchase a license to use his artwork and can do so HERE

I got this tube while PSP Asylum was still open

Scrapkit of Choice

I am using a PTU kit called “Country Roots” by Jackie's Jewels

You can find this kit HERE

Mask of Choice

I am using Mask99 by Weescotslass Creations

Which you can find HERE

Additonal Filters

Xero – Porcelain

Xero - Radiance

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Frame3

Add it to your canvas

Resize down to 60%

Open Paper13

Resize to 600px by 600px

Add to your canvas below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5

Invert the selection

On the paper layer, press delete

Deselect

Open Paper10

Resize to 600px by 600px

Add to your canvas below the paper layer we added just before

Apply your mask here

Open your tube and select the layer you'd like to go with

Add it to your canvas

Resize and reposition to your liking

Duplicate this layer

Have one below the frame and one above

One the one below add a drop shadow

On the one above

Erase the part of the legs that are over the frame

Filter → Xero → Porcelain

All at default, except the blue channel, set to 0.

Filter → Xero → Radiance

Something subtle that just brightens your tube up a bit

Filter → Sharpen → Unsharp Mask

All at default

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

ChickenWire (no drop shadow)

Weeds1

Flowers2

Vine2

Cactus2

Barrel

Spoke

Hat

Boot

Bottle

Kitten2

Apples

Leaves2 (just one leaf)

Leaves2 (just one leaf)

Leaves2 (just one leaf)

Sunflower

Ribbon1

Ribbon1

Sunflower

Sunflower

LightningBugs (no drop shadow)

LightningBugs (no drop shadow)

horseshoe

Leaves1

Sunflower

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 14^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Lielman

Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Turtle Crush” by Alikas Scraps

You can find this kit HERE

Mask of Choice

I am using mask84 by Weescotslass Creations

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open as61

Add to your canvas

Scale down to 80%

Add a drop shadow

Open paper06

Resize to 600px by 600px

Add to your canvas below the frame

Use the magic wand tool to select inside the frame

Select → Modify → Expand, by 5

Invert the selection

On the paper layer press delete

Deselect

Open paper08

Resize to 600px by 600px

Add to your canvas

Have this below the other paper layer we just used

Apply the mask to this layer

Open your tube and add to your canvas

Resize and position to your liking

Once you have this duplicate this layer

On the original add a drop shadow

On the top one

Filter → Blur → Gaussian Blur, 3.0 px

Change the blend mode to screen

Lower the opacity to 30%

Add your tube again beneath the frame

Flip horiztonally

Resize, reposition, change the angle a bit if you're needing to

Once you have that erase any of the tube that's outside the frame

Change the blend mode to luminosity

Lower the opacity to 30%

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

as55 (no drop shadow)

as54 (no drop shadow)

as35 (no drop shadow)

as35 (no drop shadow)

as35 (no drop shadow)

as45

as42

as75

as79

as72

as47

as30

as53

as52

as07

as23

as73

as22

as04

as36

as37

as08 (added an outer glower as well)

as26

as26

as25

as25

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 14^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Cuddly Rigor Mortis

Use must purchase a license to use her artwork and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Don't Bug Me” by TammyKat Designs

You can find this kit HERE

Mask of Choice

I am using mask349 by Vix

Which you can find HERE

Additonal Filters

Xero - Porcelain

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open ribbonframes

Add to your canvas

Scale down to 90%

Angle to -25 degrees

Add a drop shadow

Open bluewrinkle2

Resize to 600px by 600px

Add to your canvas below the frame

Use your magic wand to select inside the frames

Select → Modify → Expand, by 5

Invert the selection

On the paper layer, press delete

Open redwrinkle

Resize to 600px by 600px

Add to your canvas below the other paper layer

Apply the mask to this layer

Open your tube and add it to your canvas as the top layer here.

Resize and position to your liking.

Add a drop shadow

Filter → Xero → Porcelain

All at default, except the blue channel at 0

Filter → Sharpen → Unsharp mask

all at default

Add your tube in each of the frames as you'd like

Erase any of the tubes outside the frame

Change the blend modes to luminosity and the opacity to 50%

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

ribbonborder-vertical

sequinstitches

greenleaf

greenleaf

bugheart-ribbon

redbow

sequinred

bugginword (added a stroke to this one)

whiteladybug

dottedbutterfly

pinkbow

sequinblue

sequinblue

sequinwhite

sequinwhite

sequinred

ltpinkbow

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 13^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Elias Chatzoudis

Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice

I am using a PTU kit called “Soft and Sweet” by Designs by Sarah

You can find this kit HERE

Mask of Choice

I am using mask4 by Lizquis

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame1

Scale down to 52%

Duplicate and the rotate each of them and position similarly to what I have in my example.

Open pp12

Resize to 600px by 600px

Use your magic wand to select inside of each of the two frames

Select → Modify → Expand, by 5

Invert the selection

On the paper layer, press delete.

Open pp1

Resize to 600px by 600px

have this just above the white background layer

Apply the mask to this layer

Add your full body tube to your canvas

resize and position as you'd like

Once you have this duplicate it

On the bottom one add a drop shadow

On the top one

Filter → blur → gaussian blur, 3.0 px

Change the blend mode to soft light

Add your close up of your tube

Flip is horizontally

resize and reposition, have the first one below the frame

Erase any that may be extneding outside the frame

Add a drop shadow

Duplicate this layer

Drag it above the frames

Erase any on the bottom that's over the frame or bow of the frame

Duplicate

On the one we just worked with convert to grayscale

On the top one change the blend mode to soft light

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

glitter3 (no drop shadow)

glitter1 (no drop shadow)

pearls

pearls

rose

rose

tag3

glitter4 (no drop shadow)

button1

button1

flower1

flower2

button2

button2

button3

button3

bow2

bow1

Add your name

Over your name add lace and create a clipping mask

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 12^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of The Hunter

Use must purchase a license to use his artwork

I got this tube while he was at PTE but is now independent

You can find his store HERE

Scrapkit of Choice

I am using a PTU kit called “Bliss” by PolkaDot Scraps

You can find this kit HERE

Mask of Choice

I am using mask23 by moonbeams and spiderwebs

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame1

Add to your canvas

Scale down to 80%

Add a drop shadow

Open paper1

Add to your canvas

and scale down as much as you'd like

I went to just around the the frame so I cuold get as much of the detail of the paper in there as I could.

Use your magic wand to select inside the frame

Select → Modify → Expand, by 8

Invert the selection

On the paper layer press delete.

Deselect

Open paper6

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply your mask to this layer

Open your tube and add it to your canvas

Resize and position to your liking

Duplicate

have one above and one below the frame

On the one below erase any of the legs that are outside the frame

add a drop shadow

On the one above erase any of the legs outside and over the frame

Duplicate and on the new layer

Filter → Blur → Gaussian blur, 3.0px

Change the blend mode to soft light, opacity at 50%

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

element24

element9

element7 (no drop shadow)

element25

element31

element5

element7 (no drop shadow, small portions)

element28

element27

element20

element12

element12

element17

element18

element18

element18

element17

element34 (no drop shadow, an outer glow added, some erased)

element6

element11

element14

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 12^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of VeryMany

Use must purchase a license to use their artwork and can do so HERE

This tube was a prepaid but, you can still get it buy joining the VIP Platinum club

Scrapkit of Choice

I am a PTU kit called “So Bitter Sweet” by Sam's Scraps

You can find this kit HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Frame 4

Add to your canvas

Scale down to 70%

Add a drop shadow

Open Paper15

Resize to 600px by 600px

Add to your canvas

have below your frame

Use your magic wand tool to select inside the frame

Select → Modify → Expand, by 5

Invert the selection

On the paper layer, press delete

deselect

Open Mat 1

Add to your canvas

Have it below the paper layer we just made

Resize and position as you'd like

Open glitter scratches 2

Add to your canvas

Have this between the frame and the paper backround we made

Resize and reposition to your liking

Erase any that's outside the frame

Open your tube up and add it to your canvas

Resize and reposition to your liking.

Once you have this duplicate it

Have one above the frame and one below

On the one below erase the legs that are extending beyond the frame, add a drop shadow

On the one above

Erase the legs that are beyond the frame and also over the frame

Duplicate it

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light, the opacity to 50%

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

glitter splat (no drop shadow)

glitter splat (no drop shadow)

ribbon 3

string

plant

flower 4

ribbon 4

leaf 1

leaf 1

leaf 1

flower 3

flower 5

flower 1

cupcake 2

flair 1

flair 1

gem 2

gem 2

gem 2

ribbon 6

gem 2

gem 2

gem 2

flower 8

ribbon 6

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 11^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Tony Tzanoukakis

Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice

I am a PTU kit called “Good Girl” by Pimp'd Designz

You can find this kit HERE

Mask of Choice

I am using the following

The folder I have this in is only labeled New Folder so, I don't remember where I got it at all.

If it's yours or you know where to download it please let me know and I'll take it down and put a link back to the blog :)

Addiontal Filters Needed

Xero – Porcelain

Xero – Radiance

VanDerLee – Unplugged X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open Frame-02

Add to your canvas

Scale down by 80%

Open pp-04

Add to your canvas

Have below your frame

Use your magic wand to select inside to frame

Select → Modify → Expand, by 5

Invert the selection and on the paper layer press delete

Deselect

Duplicate this layer

Filter → VanDerLee → Unplugged-X → Pattern Offset

Change the blend mode to soft light

Open pp-03

Add to your canvas

Have this layer just above the white background layer

Apply the mask to this layer

Go to the full body tube and merge together the layers you're wanting showing

Add to your canvas

Resize and reposition to your liking

Once you have this

Filter → Xero → Porcelain

All at default, except the blue channel at 0

Filter → Xero → Radience

Something subtle that just brightens the tube a bit

Filter → Sharpen → Unsharp mask

All at default

Add a drop shadow to the tube

Go to your close up of the same tube and merge your layers together like you did before

Add it to you canvas, in between the two purple paper layers

Flip horizontally, resize and position as you'd like

Erase any of the tube that's on the outside of the frame

Change the blend mode to luminosity, the opacity to 30%

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

wire (no drop shadow)

doodle2 (added an outer glow here)

doodle2 (added an outer glow here)

doodle

doodle

greens

flower-03

bead-branch

ribbon-02

flower-02

flower-05

flower-04

halo (erased a bit of this to make it look like it loops around the frame)

star

ribbon-03

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~Click Image to see full size~

Here is a layout I made using the kit, "Just Beachy" by Kikeka Kits

She is retiring this one very soon so be sure to check it out and get it for a great price.

You can find the kit HERE - Be sure to get them before they're gone!

The pictures are of my little girl that I took while we were on a weekend away last year.

~~Click on Sample to view full size~~
This Tutorial was written on April 11^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Jennifer Janesko

Use must purchase a license to use her artwork and can do so HERE

Scrapkit of Choice

I am a PTU kit called “Ruby” by Kikeka Kits

You can find this kit HERE

It's actually going to be retired and is on sale for just a short time so get it along with some of her other amazing kits at a steal price!

Mask of Choice

I am using Mask99 by Weescotslass Creations

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

This is a full sized kit so there is lots of resizing involved but it's WELL worth it!!

I did usually down to about 20% and then adjusted from there.

Open frame03

Add it to your canvas and scale down

Angle it a bit

Duplicate and adjust the angle and position of the frame

Add a drop shadow to both of the frames

Open paper10

Resize to 600px by 600px

Add to your canvas below your frames

use your magic wand to select inside each of the frames

Select → Modify → Expand, by 5

On the paper layer press delete.

Open paper01

resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the mask here

Add your tube to your canvas

Resize and reposition to your liking

Add a drop shadow

Duplicate

On the new layer delete the drop shadow

Filter → Blur → Gaussian blur

change the blend mode to soft light and the opacity to 50%

erase the frame that's going through the other frame at the bottom

Add your tube to each of the frames

erasing what is extending outside of them

Change the blend modes to luminosity

the opacity of the bottom frame at 50%, the top at 30%

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

branch02

branch02

scatter03 (no drop shadow)

flower03

branch01

sequins

ribbon03

butterflies

ribbon01

ribbon04

butterfly

butterfly

flower02

flower01

button01

gem03

gem03

gem03

button05

button05

button05

button03

button03

button03

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 9^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Scrapkit of Choice

I am a PTU kit called “Funky Easter” by TammyKat Dezigns

You can find this kit HERE

Mask of Choice

I am using BigMask008 by Vix

Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Add the elements that you'd like to resize, positioned and drop shadowed as you'd like.

I used the following from the bottom up with a drop shadow unless stated.

Foldedribbon-blue

grass1

flowerpink

goofysquiggle-drkpink

basket-purple

bunny

flower-blue

heartspurpleblue (just 1 of them)

heartspurpleblue (just 1 of them)

tinyflower-yellow

tinyflower-drkpink

butterfly2

button-purple

button-pink

Open paper1

Resize to 600px by 600px

Add to your canvas and drag to just above the white background layer in your pallate

Apply the mask here.

Add your name, I created a clipping mask with heartspaper

Add some wordart if you're wanting to

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 5^th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Rion

Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice

I am a PTU kit called “Hoppy Spring” by Designs by Sarah

You can find this kit HERE

It comes with a set of clusters as well and we're going to be using one of those too.

Mask of Choice

I am using PTUMask8 by Vix

Which you can find HERE

Additonal Filters Needed

Penta - Jeans

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Go to the cluster frames and open Cluster 1

Add it to your canvas

Scale down to 70% and rotate 10 degrees

Add a drop shadow

Open pp9

Resize to 600px by 600px

Add to your canvas

use your magic wand to select inside the two frames there, get as much of it as you can

Select → Modify → Expand, by 7

Invert and on the paper press delete

Deselect

Add your tube and arrange and resize how you're wanting to

Once you have that duplicate the tube

On the bottom add a drop shadow

On the top one

Filter → Blur → Gaussian Blur, 3.0 px

Change the blend mode to soft light

Add your tube again

Have it below the frame layer

Flip horizontally, resize and reposition to your liking

Once you have that, Select the paper background

Invert the selection and on the tube layer, press delete

Deselect

Change the blend mode to luminosity, lower the opacity to 53%

Duplicate the paper background layer

Bring it to above the tube we placed in the frame in the pallate

Filter → Penta → Jeans

amount – 20, border – 4

Change the blend mode to, soft light

Open pp7

Resize to 600px by 600px

Add to your canvas, have just above the white background layer

Apply the mask to this layer

Now add which elements you'd like

I used the following from the bottom up with a drop shadow unless stated:

splatter3 (no drop shadow)

splatter1 (no drop shadow)

splatter2 (no drop shadow)

ribbon 2

flower 1

flower 1

flower 2

flower 2

bow2

bunny

carrots

Add your name

Image → Trim

Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with you're result save to your liking and you're done!