~~Click on Sample to view full size~~
This Tutorial was written on February ‎15th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ismael Rac

You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice

I am using “Awesome Sauce” by Alika's Scraps

You can find this HERE

Mask of Choice

I am using BigMask001 by Vix

You can find this HERE

Additional Filters Needed

VanDerLee – Unplugged-X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open as38

Add to your canvas

Resize down by 60%

Rotate -15 degrees

Add a drop shadow

Open paper09

Resize to 600px by 600px

Add to your canvas just below the frame

Use your magic wand to select inside the frames

Select → Modify → Expand, by 5px

Invert the selection

On the paper layer press delete

Deselect

Duplicate

Filter → VanDerLee → Unplugged-X → Pattern Offset

Change the blend mode to soft light

Open paper06

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Rotate 90 degrees and resize just a bit

Add the tube to the canvas

Resize and reposition to your liking

drag below the frame

erase any of the legs that our outside it at the bottom

Duplicate and bring above the frame

Erase any of the tube thats over the frame at the legs

Duplicate

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to overlay

On the very bottom tube

Add a drop shadow

Add the tube once more

In between the two frame background layers

I flipped mine horizontally

Erase any of the tube that's outside the frame

Change the blend mode to luminosity

Lower the opacity to 60%

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

as41 (no drop shadow)

as03 (no drop shadow)

as28

as02 (no drop shadow)

as01 (no drop shadow)

as01 (no drop shadow)

as52

as60

as51

as56

as58

as50

as54

as44

as46

as04

as08

as05

as57 (added a stroke)

as48

as15

as23

as15

as62 (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

Here is another sample I made of this tag but, I recolored a few of the elements to match the tube I used here a bit more :)

This Tutorial was written on February 15th, 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

Tube of choice.
I am using the artwork of Buttercrumble

Use must purchase a license to their artwork and can do so HERE

Texture of Choice

I used Texture Pack 11 from Brutal Designs

Which you can find HERE

Additonal Filters Needed

MuRa's Meisters – Copies

Venderlee – Unplugged X

Xenofex 2 – Constellation

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 250px

Open your tube and add to your canvas

Filter → MuRa's Meister's → Copies

Wallpaper (rotate), all at default

Filter → Blur → Motion Blur.

Angle – 15 degrees, Distance – 225 pixels

Add your tube to your canvas again.

Resize and position to your liking.

Once you're happy with that, add a drop shadow to your tube.

Add your tube to your canvas once more

Flip horizontally and place to the far right of your canvas

I had some of mine off the edge as well

Filter → MuRa's Meister's → Copies

Line (random rotate), all at default

Change the blend mode to luminosity, lower the opacity to 30%

Add the texture to your canvas

In between the background layer and the line (random rotate layer)

Reposition if you'd like to

Desaturate

Change the blend mode to soft light

Add a new layer

Choose two colors from the tube

I used the socks and chose the sea green and purple

Using your gradient tool

set for foreground to background

linear gradiant

Drag from the upper left to the bottom right corner

Change the blend mode to color

type out happy and put it in the upper left corner

change the blend mode to overlay

type out easter and put it in the bottom right corner

change the blend mode to overlay

Using the lasso tool draw out a wavy line similar to this:

*Make sure you close the lines our you'll get and wave on a straight line sort of deal

Hit “Q” for quick mask

Filter → Noise → Median

I did a radius of 75 pixels

Hit “Q” once more to turn off the quick mask

Hightlight the layer we made the gradient on

Copy and paste as a new layer

Now duplicate this new layer and move straight down a little ways

(hold down shift to do this OR with your move tool selected use the down arrow)

Now Ctrl + Click on the thumbnail of the layer we moved down

On the original wavey line layer press delete

Deselect

Now you can just delete the layer we moved down

Now we have the sort of wavey square that goes across our tag :)

On the layer

Filer → VanDerLee → Unplugged-X → Pattern Offset

Change the blend mode to soft light

Add an outer glow

Now Ctrl + Click on this layer

Above where your layers are click the paths tab

Now at the bottom of this tab there is a cicle with a line around it with nodes (make work path from selection)

Click that button

Use your text tool and hover over the line it made

Your I with the box around it cursor with cange to and I with a wavey line through it when it does right click your mouse and type out your saying

I used “Cute Bunny ~ Cute Bunny ~ Cute Bunny”

Have this text be white

Move the text down as we did before (so it goes straight down and continues to follow the same path as the box)

Change the blend mode to soft light

Add a new layer above everything

Use your rectangular marquee tool to select your whole tag

Edit → Stroke

Width – 8

Use any color for this, we'll be deleting, it's just to make our border

Center

Mode – Normal

Opacity – 100%

Now select this layer (Ctrl + Click the thumbnail)

Select the gradient layer once more

Copy and paste as a new layer

(you may have to move it back above all the layers once again)

Delete the original stroke layer

On the border that is now filled with the gradient

Flip horizontally and Flip Vertically

Add the same outer glow as we did to the wavey line

Add some noise

Add your name to your tag

*****Most Important*****

Add your copyright information

Now if you don't want to animate just save as you'd like to and you're done

This is where I save as a .psd file as well so if I mess up somehow I have my original to fall back on

For the avatar

Start a new canvas

200px by 200px

Flood fill with black

On our banner hide the copyright, name, border and merge all the other layers together

Drag the black square we just made over to that canvas

Have it below the merged layers

Create a clipping mask and move it to where you want it so that you see the tube inside the square

Once you have it how you like it merge the layers and drag the merged layers to our smaller canvas

Add a border to your canvas like we did before

Add your name

***Most Important***

Add the copyright

Save and you're done with the avatar!!

Now for the animation of the banner

either undo all the merging and dragging we did before OR close it out and open it back up *as long as you saved it as a .psd before

Now just above the rotated tube layer add four layers all filled with black and they blend mode set to screen

On each of them we're going to add the constellation with the following settings:

Hit the random seed on each one AT LEAST 1 time so that the sparkles are different on each

You can hit it a few times to get something you like more if you're wanting to as well :)

Now once that is all done hide the top 3 black sparkle layers

You can see that all that really shows now is the sparkles :)

We're going to open our animation window now

Have it set to a delay of .1 secs

And to go on forever

On this first animation frame change the opacity of the first layer of sparkles to 60%

Add a new animation frame and change the opacity to 70%

Add a new animation frame and change the opacity to 80%

Add a new animation frame and change the opacity to 90%

Add a new animation frame and change the opacity to 100%

Add a new animation frame and change the opacity to 90%

Add a new animation frame and change the opacity to 80%

Add a new animation frame and change the opacity to 70%

Add a new animation frame and change the opacity to 60%

Add a new animation frame and change the opacity to 50%

Now on this frame you're going to unhide the second sparkle layer and change the opacity of this layer to 10%

Add a new animation frame and change the opacity of the first to 40% and the second to 20%

Add a new animation frame and change the opacity of both to 30%

Add a new animation frame and change the opacity of the first to 20% and the second to 40%

Add a new animation frame and change the opacity of the first to 10% and the second to 50%

Add a new animation frame and hide the first layer and the second change the opacity to 60%

You're going to repeat this for each of the following two layers, when you get to the fourth layer at 50% you need to unhide the first layer once again and use it as the gradually increasing opacity layer

Once it's a completed loop you can press play and watch the animation go!

If you're happy with how it looks save as a .gif and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February ‎15th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of FourXsDesigns

You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice

I am using “Hickory Dickory Dock” by PolkaDot Scraps

You can find this HERE

Mask of Choice

I am using Mask99 by Weescotslass

You can find this HERE

Additional Filters Needed

Xero – Porcelain

Xero – Radiance

VanDerLee – Unplugged-X – Patter Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame8

Add to your canvas

Resize down by73%

Add a drop shadow

Open Paper9

Resize to 600px by 600px

Add to your canvas just below the frames

Use your magic wand to select inside the frames

Select → Modify → Expand, by 5px

Invert the selection

On the paper layer press delete

Deselect

Duplicate

Filter → VanDerLee → Unplugged-X → Pattern Offset

Change the blend mode to soft light

Open Paper1

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Filter → Xero → Porcelain

Add at default except blue channel slide to 0

Filter → Xero → Radience

Something subtle that just brightens your tube back up just a bit

Add a drop shadow

Add the close up of the tube to you canvas a few times

In between the two frame background layers

Different sizes and positions

I flipped a couple horizontally

Merge them all together

Change the blend mode to luminosity

Lower the opacity to 50%

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

element30 (no drop shadow)

element30 (no drop shadow)

element9

element21 (no drop shadow)

element33

element17

element31 (no drop shadow)

element23

element15

element15

element19

element16

element16

element6

element22

element22

element28

element27

element26

element10

element7

element7

element32 (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February ‎14th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Zindy S. D. Nielsen

You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice

I am using “Midnight Blues” by Candy's Treats

You can find this HERE

Mask of Choice

I am using StarMask1 by Rose

You can find this HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame3

Add to your canvas

Resize down by 90%

Add a drop shadow

Open PP7 (It's in the “freebie” portion)

Resize to 600px by 600px

Add to your canvas just below the frames

Use your magic wand to select inside the frames

Select → Modify → Expand, by 5px

Invert the selection

On the paper layer press delete

Deselect

Open PP3

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Just below the frame

Resize and reposition to your liking

Erase any of the tube that's outside the bottom of the frame

Duplicate this layer

Bring this layer above the frame layer

Erase any of the tube that is over the frame now

Duplicate this layer

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to overlay

On the bottom tube

Add a drop shadow

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

BracketBack (no drop shadow)

swirl2 (no drop shadow)

swirl2 (no drop shadow)

BG5 (no drop shadow)

MidnightFlowers

MidnightFlowers

Moon

MidnightEle1Leaves

leavesBlack

Ribbon5

ribbon12

MoonlightBlues (Word art, added a stroke)

Midnightcluster3

StarStud1

StarStud1

ribbon1

MidnightFlower5

StarStud2

StarStud2

MidnightFlower4

MidnightFlower3

MidnightFlower6

MidnightFlower5

MidnightFlower4

MidnightFlower3

MidnightFlower6

Bat2

Ribbon11

safetypin

butterfly

butterfly

butterfly

Add sparkles of choice here if you'd like to

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February ‎12th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Keith Garvey

You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice

I am using “Love Notes” by Designs by Sarah

You can find this HERE

Mask of Choice

I am using mask17 by Melissas Creationz

You can find this HERE

Additional Filters Needed

VanDerLee – Unplugged-X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame 2

Add to your canvas

Resize down by 90%

Add a drop shadow

Open pp7

Resize to 600px by 600px

Add to your canvas just below the frames

Use your magic wand to select inside the frames

Select → Modify → Expand, by 5px

Invert the selection

On the paper layer press delete

Deselect

Duplicate this layer

Filter → VanDerLee → Unplugged-X → Pattern Offset

All settings at default

Change the blend mode to soft light

Open pp2

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Duplicate this layer

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

On the bottom tube

Add a drop shadow

Add your tube to the canvas in between the two papers layers

I flipped mine horizontally

Erase any of that's outside the frame

Change the blend mode to luminosity

Lower the opacity to 50%

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

hearts (no drop shadow)

hearts (no drop shadow)

ribbon 2 (no drop shadow)

ribbon 2 (no drop shadow)

branch 2

swirl

note 6

swirl

flower 2

fan

note 2

key

pen

button 1

flower 4

flower 5

flower 1

bow 1

Add your name

*I used print 2 over the name as well to get the sort of newspaper effect*

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February ‎12th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Alex Prihodko

You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice

I am using “2 in Love” by PolkaDot Scraps

You can find this HERE

Mask of Choice

I am using mask362 by Weescotslass

You can find this HERE

Additional Filters Needed

Xero – Porcelain

PhotoEffex - Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame4

Add to your canvas

Resize down by 55%

Rotate -15 degrees

Duplicate

Flip horizontally

Arrange similar to the sample tag

Add a drop shadow to both frames

Open paper7

Resize to 600px by 600px

Add to your canvas just below the frames

Use your magic wand to select inside the frames

Select → Modify → Expand, by 5px

Invert the selection

On the paper layer press delete

Deselect

Duplicate this layer

Filter → PhotoEffex → Scanlines

With the following settings:

Width - 2

Spacing – 2

Dark Band Strength – 35

Light Nonband Strength – 10

Noise:Amount – 3

Darkness/Lightness – 0

Vertical Toggle NOT checked

Lower the opacity to 50%

Open paper1

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Erase any that's outside the bottom of the frame

Duplicate this layer

Move this layer above the frame

Erase any that is overlapping the frame at the bottom

On the top one

Filter → Xero → Porcelain

All at default except the blue channel slide to 0

Filter → Sharpen → Unsharp Mask

All at default

On the bottom tube

Add a drop shadow

Add your tube to the canvas under the bottom tube from above a couple of times in between the two papers layers

I flipped one horizontally as well

Erase any of them that are outside the frame

Change the blend mode to luminosity

Lower the opacity to 70%

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

element32

element31

element14

element33 (no drop shadow)

element33 (no drop shadow)

element32

element18

element31

element3

element29

element3

element17

element2

element16

element29

element6

element20

element23

element7

element7

element10

element4 (stroke added)

Add the word you (used a stroke on this one and added noise to it as well)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February ‎12th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of VeryMany

You must purchase a license to use their tubes and can do so HERE

Scrapkit of Choice

I am using “HeartBreaker” by Alika's Scraps

You can find this HERE

*I also used sparkles from her Totally Zirconia kit, use any of your choice for this if you'd like to*

Mask of Choice

I am using mask141 by Weescotslass

You can find this HERE

Additional Filters Needed

Xero – Porcelain

Xero - Radiance

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open as66

Add to your canvas

Resize down by 50%

Add a drop shadow

Open papaer01

Resize to 600px by 600px

Add to your canvas just below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5px

Invert the selection

On the paper layer press delete

Select a purple from the highlight's in the hair of the tube

Add a new layer and on this new layer

Using Gradient fill, foreground to Transparent, Linear gradient

Drag from the top corner to the bottom corner of your canvas

Change the blend mode to color

Deselect

Merge the two layers together

Open paper10

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Erase any that's outside the bottom of the from

Duplicate this layer

Move this layer above the frame

Erase any that is overlapping the frame at the bottom

Duplicate

On the top one

Filter → Xero → Porcelain

All at default except the blue channel slide to 0

Filter → Xero → Radiance

Click random a couple of times until you find something subtle that you like with your tube

Filter → Sharpen → Unsharp Mask

All at default

On the bottom tube

Add a drop shadow

Add your tube to the canvas under the bottom tube from above a couple of times

I flipped one horizontally as well

Erase any of them that are outside the frame

Change the blend mode to luminosity

Lower the opacity to 50%

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

as77 (no drop shadow)

as08 (no drop shadow)

as08 (no drop shadow)

as72 (no drop shadow)

as72 (no drop shadow)

as12

as12

as29

as31

as02

as60

as14

as09

as56

as62

as11 (stroke added, added noise)

as07

as07

as03

as54

as32

Add sparkles of choice here

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February ‎12th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Shelly Soneja

I purchased this tube while she was at PTE but it is now available at The PSP Project

You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice

I am using “Passion” by Pimp'd Designz

You can find this HERE

Mask of Choice

I am using mask176 by Vix

You can find this HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame-04

Add to your canvas

Add a drop shadow

Open pp-09

Resize to 600px by 600px

Add to your canvas just below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5px

Invert the selection

On the paper layer press delete

Deselect

Open pp-04

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Erase any that's outside the bottom of the from

Duplicate this layer

Move this layer above the frame

Erase any that is overlapping the frame at the bottom

Duplicate

On the top one

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

On the bottom tube

Add a drop shadow

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

*I started on the left side of the frame and worked there then duplicated and mirrored the elements to the right*

feather wing

arrow

ribbon-01

flair-03

key

flower-04

flower-01

flower-03

flower-02

lips (stroke added)

ribbon-03

Duplicate your elements, flip horizontal and move over to the right side of the frame

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February ‎12th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of PinUp Toons

You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice

I am using “Vintage Adoration” by Designs By Sarah

You can find this HERE

Mask of Choice

I am using mask147 by Weescotslass

You can find this HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame1

Add to your canvas

Resize down to 60%

Duplicate

Rotate the frame on the bottom -15 degrees

Desaturate

Open pp2

Resize to 600px by 600px

Add to your canvas above the gray frame

Select the frame

Invert the selection and on the paper layer press delete

Change the blend mode to color

Add a drop shadow to both frames

Open pp8

Resize to 600px by 600px

Add to your canvas just below the frames

Use your magic wand to select inside the frames

Select → Modify → Expand, by 2px

Invert the selection

On the paper layer press delete

Deselect

Open pp6

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Duplicate this layer

On the top one

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

On the bottom tube

Add a drop shadow

Add your tube again under the frame

Resize and reposition to your liking

I flipped mince horizontally

Erase any of the tube that's outside the frame

Desaturate

Change the blend mode to hard light

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

swirl1 (no drop shadow)

swirl1 (no drop shadow)

word art 1 (no drop shadow)

leaves

branch

chocolate4

chocolate3

rose

boxes

rose

tag 2

heart 1

butterfly print 1

flower 1

dragonfly print (added a stroke)

butterfly print 2

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on February ‎11th, ‎2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.

Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5

But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Jenna-Lee

You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice

I am using “This Love” by Rabid Designz

You can find this HERE

Mask of Choice

I am using mask141 by Weescotslass

You can find this HERE

Additional Plugins Needed

VanDerLee – Unplugged-X

~*~*~ Let's Get Started~*~*~

Start a new canvas

600px by 600px

Flood fill with white.

Open frame3

Add to your canvas

Resize down to 60%

Add a drop shadow

Open paper8

Resize to 600px by 600px

Add to your canvas just below the frame

Use your magic wand to select inside the frame

Select → Modify → Expand, by 5px

Invert the selection

On the paper layer press delete

Deselect

Duplicate the layer

Filter → VanDerLee → Unplugged-X → Pattern Offset

change the blend mode to soft light

Open paper7

Resize to 600px by 600px

Add to your canvas just above the white background layer

Apply the layer mask here

Add the tube to the canvas

Resize and reposition to your liking

Duplicate this layer

On the top one

Filter → Blur → Gaussian Blur, 3.0px

Change the blend mode to soft light

On the bottom tube

Add a drop shadow

Add your tube again under the frame

Resize and reposition to your liking

I flipped mince horizontally

Erase any of the tube that's outside the frame

move in between the two frame paper background layers

Change the blend mode to luminosity

Lower the Opacity to 50%

Open frame2

Add to your canvas just above the mask

Resize down to 77%

Adjust the position just slightly if needed so it looks like it's frame the pink frame

Now add which elements you'd like

I used the following from the bottom layer up with a drop shadow unless stated:

ele3 (no drop shadow)

ele4

ele47

ele24

ele3

ele34

ele11

ele19

ele23

ele22

ele26

ele40 (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****

Add your copy right information

If you're happy with your result save to your liking and you're done!