Snag My Blinkie
Find me on FB
Blogs I Love
Proud Member
Blog Awards
Thursday, June 20, 2019
~~Click
on Sample to view full size~~
This
Tutorial was written on June 17th, 2019 by Ashly
It
is of my own creation and any resemblance to any other tutorial is
purely coincidental.
Please
do not copy and do not post elsewhere.
Do
not translate or script.
This
tutorial is written as if you have a general knowledge on how to use
the program.
***What
you'll need***
Program
of Choice.
I
am using Photoshop CS6
But,
if you know your tools you can use any program of choice
Tube
of choice.
I
am using the artwork of MarieL
It's
gorgeous and a large size so you can do close ups if needed!
And
comes with multiple layers for various color variations
as
well as with or without her holding the cotton candy
You
can find her HERE
Scrapkit
of Choice
I
am using the scrapkit “Cotton Candy” by Moon Vixen Designs
It’s
a stunning kit with 5 Papers, 105 elements, 3 frames.
There
is SO much you can do with this.
Animation
of Choice
I
am using SimoneAni515
You
an find it HERE
~*~*~ Let's Get Started~*~*~
Start
a new canvas
650px
by 250px
Open
MD-PAPER -1
Duplicate
Change
the top layer to multiply
Open
your tube
I
am using layer 5.
Position
on your canvas to your liking.
I
positioned mine towards the left of my canvas.
Duplicate
once in position
Filter
→ Blur → Gaussian Blur, 3 px
Change
the blend mode to soft light and the opacity to 43%
On
the bottom layer add a drop shadow.
No
below the two main two layers and above the paper layers add a few of
the tube.
I
flipped a few horizontal.
Once
done, Change the blend mode to Luminosity, opacity at 45%
Add
a layer above this, add a pattern here, I did little white pixels
With
blend mode at soft light.
~*~*~*
Time to add Elements! ~*~*~*
Here
is what I added from the bottom layer up
with
a drop shadow, unless otherwise stated:
ELEMENTS
-MD- 3 (no dropshadow, blend mode, color)
ELEMENTS
-MD- 12 (no dropshadow)
*Animation
will be added here
ELEMENTS
-MD- 24 (no dropshadow)
ELEMENTS
-MD- 24 (no dropshadow)
ELEMENTS
-MD- 91
ELEMENTS
-MD- 41
ELEMENTS
-MD- 66
ELEMENTS
-MD- 63
ELEMENTS
-MD- 99
ELEMENTS
-MD- 38
ELEMENTS
-MD- 90
ELEMENTS
-MD- 27
ELEMENTS
-MD-15
ELEMENTS
-MD-45
ELEMENTS
-MD-59
ELEMENTS
-MD-52
ELEMENTS
-MD-97 (no dropshadow)
ELEMENTS
-MD- 97 (no dropshadow)
Now
add 3 new layers
Control
+ A
On
the top one
Edit
→ Stroke → 4
A
color from your tag
Inside
Filter
→ Noise → add noise
12.5%,
Gaussian, Monochromatic
Repeat,
but make the stroke 5
With
a different color
on
the bottom layer
repeat
the middle layer but make it black
then
Filter → Blur → Gaussian Blur → 3
Now
there are two options here, you can either be done
and
skip the animation portion or go for it!
If
you're with me for the animation...Let's do this!!
Open
the animation we're using
I
like to group mine together.
To
do that select all the layers and hit
Command
+ G
Woot
now they look like they're in their own handy layer or folder
Now
drag this layer over to your canvas while holding shift
Then
resize IF you'd like.
Add
the name of your name to your tag as you'd like it.
~*~*~*Most
important~*~*~*
Add
your copyright
as
you'd like it.
Now
make sure your animation is above the grassy hill layer
and
open the envelop we put them in and close all of the layers
except
for the first one.
To
open in click the little arrow.
Now
we animate.
Open
up Timeline
Window
→ Timeline
You'll
want it as frames so you may need to click the button
in
the center of the little window that pops up and a tiny version of
your tag pops up.
At
the very bottom the first drop down, make sure it says, “forever”
And
under the frame we're going with 0.1 seconds for this one
Now
you have your first layer done.
Second
layer you're going to click the add layer
which
is right in front of the trash can.
Then
go over to your layers we just opened. Close your frame we are seeing
and
open the next frame.
Repeat
the until all 18 frames are done.
Then
press play and watch it go.
Then
you're going to save.
To
save a gif.
It's,
ctrl + alt + shift + s
For
those that didn't do animation
Make
sure you add your name
and
~*~*~*Most
importantly~*~*~*
Add
your copyright information!!!
Then
for the avatar
I
did the canvas of 175 x 200
Used
part of my canvas
and
then repeated the borders
as
well as the animation.
ALWAYS
include your copyright information
never
EVER forget that!!
Saturday, June 15, 2019
~~Click on Sample to view full size~~
This Tutorial was written on June 15th, 2019 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.
Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.
***What you'll need***
Program of Choice.
I am using Photoshop CS6
But, if you know your tools you can use any program of choice
Tube of choice.
I am using the artwork of Arthur Crowe
This particular tube comes with the kit that I am using by Moon Vixen Designs
It's gorgeous and a large size so you can do close ups if needed!
Be sure to read your TOUs to ensure you're crediting him correctly!
Scrapkit of Choice
I am using the scrapkit “Two Peas on a Beach” by Moon Vixen Designs
It’s a stunning kit, as stated it comes with a chibi from Arthur Crowe, collab.
It has 15 Papers, 47 elements, 3 frames.
There is SO much you can do with this.
Both beach type things and underwater
You can find this kit HERE.
~*~*~ Let's Get Started~*~*~
Start a new canvas
650px by 650px
Flood fill with white.
In the Element Folder:
Open MVD - TPIAP Two Peas on a Beach Element (50)
Add to your canvas
Add a drop Shadow to this layer
From the Papers folder:
Open MVD - MVD - TPIAP Two Peas on a Beach Paper (4)
Add beneath the frame
Filter -> Blur -> Motion Blur
Angle: 30, Distance 126
Next, take your elliptical tool
And draw a circle around your frame
This might take some playing to get right, it did for me
Once you have it
Select -> Modify -> Feather 10
Then delete outside of the frame while selected on the paper.
Add your tube to the canvas.
Resize and position to your liking
Add a drop shadow
Duplicate
Delete the drop shadow from this layer
Filter -> Blur -> Gaussian Blur ->
Change the Blend Mode to Soft light
Now Add your tube again to in between the frame and the paper layer
However you want, can be once or multiple times like I did
Just whatever is your aesthetic here.
Once you’re done
Change the blend mode to Luminosity
Lower the opacity to 50%
Add a pattern of a right angle stripe
To just above the paper frame layer
I changed the blend mode to overlay
And lowered the opacity to 9%
Add MVD - TPIAP Two Peas on a Beach Element (37)
Just below the frame and merge with frame.
Delete any of the sand that is now inside of the frame.
From the Papers folder:
Open MVD - TPIAP Two Peas on a Beach Paper (4)
Use your mask of choice.
I used the following:
I do not remember where I got it.
If it’s your OR you know where I got it PLEASE let me know.
I will take it down and give credit where it’s due!
Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:
MVD - TPIAP Two Peas on a Beach Element (47) (no dropshadow)
MVD - TPIAP Two Peas on a Beach Element (47) (no dropshadow)
MVD - TPIAP Two Peas on a Beach Element (38)
MVD - TPIAP Two Peas on a Beach Element (38)
MVD - TPIAP Two Peas on a Beach Element (1) (no dropshadow)
MVD - TPIAP Two Peas on a Beach Element (1) (no dropshadow)
MVD - TPIAP Two Peas on a Beach Element (33)
MVD - TPIAP Two Peas on a Beach Element (9)
MVD - TPIAP Two Peas on a Beach Element (23)
MVD - TPIAP Two Peas on a Beach Element (24)
MVD - TPIAP Two Peas on a Beach Element (26)
MVD - TPIAP Two Peas on a Beach Element (21)
MVD - TPIAP Two Peas on a Beach Element (35)
MVD - TPIAP Two Peas on a Beach Element (30)
MVD - TPIAP Two Peas on a Beach Element (22)
MVD - TPIAP Two Peas on a Beach Element (29)
MVD - TPIAP Two Peas on a Beach Element (25)
MVD - TPIAP Two Peas on a Beach Element (5)
MVD - TPIAP Two Peas on a Beach Element (36)
MVD - TPIAP Two Peas on a Beach Element (5)
MVD - TPIAP Two Peas on a Beach Element (19)
MVD - TPIAP Two Peas on a Beach Element (35) (recolored blue)
MVD - TPIAP Two Peas on a Beach Element (15)
MVD - TPIAP Two Peas on a Beach Element (10)
MVD - TPIAP Two Peas on a Beach Element (40)
Add your name
Crop your tag to get rid of the access space that's not needed
Resize if you'd like to
****Most Important****
Add your copyright information
If you're happy with your result, save to your liking and you're done!
Thanks for trying out my tutorial or even looking at it!
I hope you enjoyed it!
Feel free to send me any samples, I love seeing them!
Friday, June 14, 2019
~~Click on Sample to view full size~~
This Tutorial was written on June 14th, 2019 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.
Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.
***What you'll need***
Program of Choice.
I am using Photoshop CS6
But, if you know your tools you can use any program of choice
Tube of choice.
I am using the artwork of Julia Fox
This particular tube comes with the kit that I am using by MarieL
It's gorgeous and a large size so you can do close ups if needed!
Be sure to read your TOUs to ensure you're crediting her correctly!
Scrapkit of Choice
I am using the scrapkit “Harley Quinn” by MarieL
You can find this kit HERE.
~*~*~ Let's Get Started~*~*~
Start a new canvas
600px by 600px
Flood fill with white.
In the Frames Folder:
Open HARLEY QUINN--FRAME--SNC-MD-1
Add to your canvas
Use your select tool to select the smaller tire
Copy and paste onto a new layer and then delete from the original layer
Arrange to your liking, sort of towards the middle of the canvas, as I have.
Add a drop shadow to both layers
From the Papers folder:
Open HARLEY QUINN-PAPER-SNC-MD-7
Resize to 600px x 600px
Duplicate once
Add to canvas below the frames.
Using the magic wand, select inside of the frame.
Select → Modify → Expand, by 4
Invert selection
On the paper layer below the frame, press delete
Deselect.
Repeat for the second frame.
Add your tube to your canvas to the bigger frame
Resize to your liking.
Move below the frame and add a drop shadow.
Duplicate and move above the frame.
Erase any of the tube that is outside of the frame that is below it, like the legs.
Leave the head alone.
Now erase the straigh leg that is over the tire so it looks like she is either resting her foot on the tire or about to set over it.
Duplicate this layer
Filter -> Blur -> Gaussian Blur -> 3
Change the blend mode to soft light
Lower the opacity to your liking
I went to 36%
Add your tube to the canvas again.
This time in between the paper and small tire frame
Once it’s resized change the blend mode to luminosity.
Lower the opacity to 65%
Add a pattern of a right angle stripe
To just the the paper frames
I changed the blend mode to soft light
And lowered the opacity to 16% on big frame
And 29% on the little frame.
Back to the tube folder:
Get the Bat and add it at an angle to the top of the large frame
I added a drop shadow and left it at that.
Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:
HARLEY QUINN-SNC-MD-108
HARLEY QUINN-SNC-MD-87
HARLEY QUINN-SNC-MD-48
HARLEY QUINN-SNC-MD-48
HARLEY QUINN-SNC-MD-19
HARLEY QUINN-SNC-MD-19
HARLEY QUINN-SNC-MD-19
HARLEY QUINN-SNC-MD-18
HARLEY QUINN-SNC-MD-51
HARLEY QUINN-SNC-MD-100
HARLEY QUINN-SNC-MD-29
HARLEY QUINN-SNC-MD-55
HARLEY QUINN-SNC-MD-55 (recolored blue)
HARLEY QUINN-SNC-MD-106
HARLEY QUINN-SNC-MD-63
HARLEY QUINN-SNC-MD-68
HARLEY QUINN-SNC-MD-102
HARLEY QUINN-SNC-MD-49
HARLEY QUINN-SNC-MD-23
HARLEY QUINN-SNC-MD-55 (recolored blue)
HARLEY QUINN-SNC-MD-74
HARLEY QUINN-SNC-MD-55
Add your name
Crop your tag to get rid of the access space that's not needed
Resize if you'd like to
****Most Important****
Add your copyright information
If you're happy with your result, save to your liking and you're done!
Thanks for trying out my tutorial or even looking at it!
I hope you enjoyed it!
Feel free to send me any samples, I love seeing them!
Subscribe to:
Posts
(Atom)
I CT For
