Snag My Blinkie

Chat Box

Followers

Blogs I Love

Karra's Kreative Korner
Tasha's Playground

Proud Member

Pimpin' Pspers
Creative Addictions
Creative Misfits

Blog Awards

Wednesday, August 14, 2013

~~Click on Sample to view full size~~
This Tutorial was written on August 14th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ismael Rac
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Kissy Face”
It's actually two kits a mix and match collab by Designs by Sarah & Pimp'd Designz
You can find this HERE & HERE

Mask of Choice
I am using Mask141 by Weescotslass Creations
You can find this for download HERE

Additional Filters
PhotoEffex - Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open sb_pmt_kissy-face_frame 2
Add to your canvas
Resize down to 75%
Rotate 13 degrees
Add a drop shadow

Open sb_pmt_kissy-face_frame 1
Add to your canvas
Resize down by 60%
Rotate -16 degree
Add a drop shadow
Arrange on the canvas

Open sb_pmt_kissy-face_pp4
Resize to 600px by 600px
Add to your canvas below the heart frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 8
Invert the selection
On the paper layer press delete

Open pd13-pp-03
Resize to 600px by 600px
Add to your canvas just below the three frames on the right
Use your magic wand to select inside each of the three frames
Select → Modify → Expand, by 4
Invert the selection
On the paper layer press delete
Duplicate
Filter → PhotoEffex → Scanlines
All at default except the width, change to 3
Change the blend mode to soft light

Open sb_pmt_kissy-face_pp5
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Move just below the heart frame
Erase any of the tubes legs that may be outside the frame
Duplicate
Erase erase and of the tube that may be over the frame at the bottom
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
Lower the opacity to 50%
To the bottom tube add a drop shadow

Add the close up in between the frame background papers
How you'd like to
Flip on or a couple Horizontally
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

pd13-print-01 (no drop shadow)
pd13-ribbon-03
sb_pmt_kissy-face_ribbon 4
sb_pmt_kissy-button 1
sb_pmt_kissy-face_button 1
pd13-flower-03
sb_pmt_kissy-face_button 2
sb_pmt_kissy-face_button 2
sb_pmt_kissy-face_flower 1
sb_pmt_kissy-face_heart n chains
pd13-heart-04
pd13-heart-04
pd13-flower-04
sb_pmt_kissy-face_lolli
sb_pmt_kissy-face_lips 2
sb_pmt_kissy-face_bow 2
sb_pmt_kissy-face_flower 3
sb_pmt_kissy-face_string 2
sb_pmt_kissy-face_cupcake
sb_pmt_kissy-face_tag holder
sb_pmt_kissy-face_lips 1
sb_pmt_kissy-face_bow 1
sb_pmt_kissy-face_lipstick kiss 1
I added some sparkles here from a different kit by Sarah, no drop shadow

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


~Click on Sample to view full size~

Tube used "Zoey" by Spazzed Art
You can find that tube HERE

Kit used - "Gamer" by Pimp'd Designz
You can find that kit HERE

The template used it one I made for this tag.
You can find that for download HERE

Here are the snags that I made up with this as well :)





Thanks for looking!!

If you snag the template or the snags please leave me a little note to let me know?
Huge Huggles!

Ashly








Tuesday, August 13, 2013

~~Click on Sample to view full size~~
This Tutorial was written on August 13th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of VeryMany
You must purchase a license to use their tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Dainty Baubles” by QueenBrat Digital Designs
You can find this HERE

Mask of Choice
I am using Mask84 by Weescotslass Creations
You can find this for download HERE

Additional Filters
VanDerLee – Unplugged-X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas
650px by 650px
Flood fill with white.

Open WhiteLaceFrame
Add to your canvas
Add a drop shadow

Open WhiteSolid
Resize to 600px by 600px
Add to your canvas below the frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 6
Invert the selection
On the paper layer press delete
Duplicate the layer
Change the blend mode to soft light

Open BlueLace
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
Lower the opacity to 50%
To the bottom tube add a drop shadow

Add the close up in between the frame background papers
Flip Horizontally
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

GreenSequinScatter (no drop shadow)
WhiteSequinScatter (no drop shadow)
WhiteSequinScatter (no drop shadow)
BlueSequinScatter (no drop shadow)
WhiteString
WhiteDotRibbon
BlueDotRibbon
WhiteLaceRibbon
BlueCurledRibbon
BlueCurledRibbon
BlueGreenGemsNecklace
WhiteGem
BlueGem
BlueBougainville
WhiteBougainville
BlueGem
BlueDotTag
GreenLeafFront
WhiteGreenJeweledFlower
WhiteGem
GreenLeafFront
BluePaperFlower
BlueGreenGemBrad
WhitePaperFlower

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!



~~Click on Sample to view full size~~
This Tutorial was written on August 13th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Arthur Crowe
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Pretty Poison” by Inzpired Creationz
You can find this HERE

Mask of Choice
I am using BigMask019 by Vix
You can find this for download HERE

Additional Filters
VanDerLee – Unplugged-X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas
650px by 650px
Flood fill with white.

Open frame 3
Add to your canvas
Resize down by 72%
Add a drop shadow

Open Frame 1
Add to your canvas
Resize down by 65%
Add a drop shadow

Open paper 5
Resize to 650px by 650px
Add to your canvas below the square frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 10
Invert the selection
On the paper layer press delete
Duplicate the layer
Filter → VanDerLee → Unplugged-X → Pattern Offset
Change the blend mode to soft light

Open paper 4
Resize to 650px by 650 px
Add to your canvas below the diamond frame
Use your magic wand to select inside the frome
Select → Modify → Expand, by 4
Invert the selection
On the paper layer press delete

Open paper11
Resize to 650px by 650px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
Lower the opacity to 50%
To the bottom tube add a drop shadow

Add the close up in between the square frame papers
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Tulle 1 (no drop shadow)
Tulle 1 (no drop shadow)
Tree 2
Scattered Petals (no drop shadow)
Ribbon 1
Ribbon 1
Leaves on Ground
Flower 2
Scattered Stars 2 (just 1 of them)
Rose 3
Scattered Stars 2 (just 1 of them)
Poison
Mirror
Fan
Brooch 2
Clock 2
Leaves 1
Leaves 1
Violin 1
Flower 3
Rose 1
Butterfly 1
Pandoras Box
Sparkles 1 (no drop shadow)
Sparkles 3 (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information


If you're happy with your result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on August 12th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ismael Rac
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Make a Wish” by Grunge & Glitter
You can find this HERE

Mask of Choice
I am using Mask219 by Weescotslass Creations
You can find this for download HERE

Additional Filters
PhotoEffex - Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame3
Add to your canvas
Resize just the width down by 75%
Them resize the both height and width
Down by 70%
Add a drop shadow

Open paper3
Resize to 600px by 600px
Add to your canvas below the frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 8
Invert the selection
On the paper layer press delete
Duplicate the layer
Filter – PhotoEffex – Scanlines
All at default, change the width to 5
Change the blend mode to overlay

Open paper11
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Move just below the frame, Erase any of the tube that's outside the frame at the bottom
Duplicate
Move above the frame, erase any of the tube that's over the frame at the bottom
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

confetti (no drop shadow)
confetti (no drop shadow)
beadscatter2 (no drop shadow)
beadscatter2 (no drop shadow)
ribbon1
button3
ribbon1
buttonstring1
button1
candle3
candle1
flower1
flower2
heartcharm1
giftbox1
paperheartwithbow2
birthdaycake
partyhat1
heartcharm2

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


Sunday, August 11, 2013

~~Click on Sample to view full size~~
This Tutorial was written on August 11th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Elias Chatzoudis
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Genie in a Bottle” by Designs by Sarah
You can find this HERE

Mask of Choice
I am using Mask84 by Weescotslass Creations
You can find this for download HERE

Additional Filters
None

~*~*~ Let's Get Started~*~*~

Start a new canvas
700px by 700px
Flood fill with white.

Open frame 3
Add to your canvas
Resize down by 70%
Add a drop shadow

Open frame 5
Add to your cnavas
Resize down by 75%
Arrange below the other frame
Add a drop shadow

Open pp4
Add to your canvas above the frame
Select your frame
Select inverse
On the paper layer press delete
Deselect
Change the blend mode to color

Open pp2
Add to your canvas below the frame
Use your magic wand to select inside the frames
Select → Modify → Expand, by 6
Invert the selection
On the paper layer press delete

Open pp1
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Move just below the frame, Erase any of the tube that's outside the frame at the bottom
Duplicate
Move above the frame, erase any of the tube that's over the frame at the bottom
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

swirl 2 (no drop shadow)
ribbon 1
magic carpet
charm
smoke 3 (no drop shadow)
lamp 1
sword
key
flower 1
diamond
flower 1 (recolored)
butterfly
magic 3 ( no drop shadow, erase what was over the tube)
Added some word art here
magic 2
magic 1

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!

Friday, August 9, 2013


~~Click on Sample to view full size~~
This Tutorial was written on August 9th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Elizabeth Austin
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Elizabeth Austin 14-2” by Chichi Designz
You can find this HERE
This is the kit inspired by the tube I'm using

Mask of Choice
I am using BigMask001 by Vix
You can find this for download HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame4
Add to your canvas
Resize just the height down by 65%
Add a drop shadow
Duplicate
Rotate the bottom one 15 degrees

Open paper1
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frames
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete

Open paper6
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to screen
Lower the opacity to 50%
To the bottom tube add a drop shadow

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Grass
Swirl2 (no drop shadow)
Doodle (no drop shadow)
Doodle (no drop shadow)
LaceBrush2 (no drop shadow)
LaceBrush2 (no drop shadow)
Flower1
Flowers1
FlowerFrame
Flowers2
Clouds (no drop shadow)
Flower1
Flowers1
Bird
Butterfly
Sparkle (no drop shadow)
Butterfly
Butterfly
Sparkle (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!




~~Click on Sample to view full size~~
This Tutorial was written on August 8th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Amy Matthews
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Ted Hammond 27-3” by Chichi Designz
You can find this HERE

Mask of Choice
I am using Mask219 by Weescotslass Creations
You can find this for download HERE


~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame1
Add to your canvas
Rotate -15 degrees
Resize just the height down by 45%
Add a drop shadow

Open Paper1
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete

Open Paper6
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Sharpen → Sharpen
Lower the opacity to 50%
To the bottom tube add a drop shadow

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Moon (added an outer glow)
Cloud (no drop shadow)
Cloud (no drop shadow)
Smudges (no drop shadow)
Rubble (no drop shadow)
Web
Vines
Cross
Branch
Broom
Cauldron
Bottle
Skulls
Rose
Spider

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


Wednesday, August 7, 2013


~~Click on Sample to view full size~~
This Tutorial was written on August 7th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ismael Rac
You must purchase a license to use his tubes and can do so HERE
Before merging the layers you'd like to use together change the red dots mode to soft light to get the sort of pinkish color as seen in my sample.

Scrapkit of Choice
I am using the scrapkit “Adorkable” by Candy's Treats
You can find this HERE
*I used some sparkles from elsewhere, this is entirely optional!*

Mask of Choice
I am using Mask 133 by Vabys
You can find this for download HERE

Additional Filters
PhotoEffex - Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame5
Add to your canvas
Rotate 90 degree Clockwise
Resize just the height down by 80%
Add a drop shadow
Duplicate
Rotate 5 degrees

Arrange them on your canvas as you wish
You can use mine as a guide :)

Open PP7
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frames of the top frame
Select → Modify → Expand, by 4
Invert the selection
On the paper layer press delete
Duplicate
Filter → PhotoEffex → Scanlines
All at default aside from the width change to 3
Change the blend mode to soft light

Open PP9
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frames of the bottom frame
Select → Modify → Expand, by 4
Invert the selection
On the paper layer press delete
Duplicate
Filter → PhotoEffex → Scanlines
All at default aside from the width change to 3
Change the blend mode to soft light

Open PP14
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
Lower the opacity to 50%
To the bottom tube add a drop shadow

Add your tube to the top frame in between the two paper layers
Erase any that is outside the frame
Change the blend mode to luminosity
Lower the opacity to 70%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

bg4 (no drop shadow)
WA19 (just above the tube in the frame, no drop shadow, blend mode set to overlay)
Glitter
DiamondsPurpleLine (just one)
DiamondsPurpleLine (just one)
DiamondsPurpleLine (just one)
Glitter
Stars
Leaves2
Leaves2
Button2
Star2
Bow3
Bow3
Flowersmalld
CurlyRibbon3
CurlyRibbon3
Heart1
Flower1a
Star3
Flower2a
Cluster2
Stitches (no drop shadow)
CharmLink
CharmLink
Moustache
Glasses
Bow2
Bow2
DiamondsPurpleLine (just one)
DiamondsPurpleLine (just one)
Add sparkles of choice here (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!

Tuesday, August 6, 2013



~~Click on Sample to view full size~~
This Tutorial was written on August 6th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Danny Lee
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using “Zombie Girlz” by Designs by Sarah
You can find this kit HERE
It was designed using inspiration from the tube I am using as well

Mask of Choice
I am using MaskHalloween2012-9 by Vix
You can find this for download HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame 4
Add to your canvas
Resize down by 65%
Rotate -15 degrees

Open frame 5
Add to your canvas
Resize down by 65%
Rotate 15 Degree
Arrange the two frame on your canvas

Open pp3
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 4
Invert the selection
On the paper layer press delete

Open pp7
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas
resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian blur, 3.0 px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Add your close up of your tube under the frame layers
Resize and position as you'd like
Erase any that's outside the frames
Change the blend mode to luminosity
Lower the opacity of them to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

print 2 (no drop shadow)
print 2 (no drop shadow)
print 1 (no drop shadow)
music notes 1 (no drop shadow)
music notes 1 (no drop shadow)
ribbon 4
word art 1 (add an outer glow as well)
guitar
heart 1
button 1
button 1
brain
cupcake 1
vial
headphones
skulls
bow 1
bow 1
button 1

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!

Friday, August 2, 2013

~~Click on Sample to view full size~~
This Tutorial was written on August 2nd  2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ismael Rac
You must purchase a license to use his tubes and can do so HERE
I did recolor this tube to match the kit a bit more but, the other colors would work well as well

Scrapkit of Choice
I am using “Back 2 School Purple” by Designs by Sarah
You can find this kit HERE

Mask of Choice
I am using Mask141 by Weescotslass Creations
You can find this for download HERE

Additional Filters
VanDerLee - Unplugged-X

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame 1
Add to your canvas
Resize down by 80%
Add a new layer below the frame
Select the frame
Select → Modify → Expand, by 2
Flood fill with a light color from your tube
Deselect
Filter → Noise → Add Noise
20%, Gaussian, Monochromatic
Add a drop shadow

Open pp6
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 10
Invert the selection
On the paper layer press delete
Duplicate this layer
Filter → VanDerLee → Unplugged-X
Pattern offset
change the blend mode to soft light

Open pp2
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas
resize and reposition to your liking
Move below the frame
Erase any of the tube that's outside the circle frame at the bottom
Duplicate
Move this layer above the circle frame
Erase any of the tube that's over the frame
Filter → Blur → Gaussian blur, 3.0 px
Change the blend mode to soft light
lower the opacity to 50%
To the bottom tube add a drop shadow

Add your tube in between the two paper layers a couple of times
Resize and position as you'd like
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity of them to 70%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

grunge 2 (no drop shadow)
ribbon1
ruler
pen
backpack
string 2
scribble 2 (no drop shadow)
scribble 2 (no drop shadow)
grunge 1 (no drop shadow)
string 1
paper sheet
Sparkles on the right from elsewhere (no drop shadow, I used Sarah's ET kit for this)
notebook 1
button 2
scribble 2
notebooks pencil
button 2
button 2
shoes
calculator
flower 1
little flower 2
little flower 1
bow 1
Sparkles from before on the left this time (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


About Me

My photo
Hey everyone!! Thanks for stopping by! My name is Ashly and I'm a 27 y/o SAHM to 1 little girl. I love designing in my free time as a way to destress a bit and have been making tags and siggies for about 6 years now but, am still continually learning. You can email me at: garyswifey06@gmail.com

Search

I CT For

Alika's Scraps
Chichi Designz
FourXDesigns
Candy's Treats
Photobucket

Categories