Snag My Blinkie

Chat Box

Followers

Blogs I Love

Karra's Kreative Korner
Tasha's Playground

Proud Member

Pimpin' Pspers
Creative Addictions
Creative Misfits

Blog Awards

Wednesday, July 31, 2013

~~Click on Sample to view full size~~
This Tutorial was written on July 31st 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of PinUp Toons
You must purchase a license to use his tubes and can do so HERE
This was a bonus tube but, there are plenty of others that would work so well with this

Scrapkit of Choice
I am using Inpired by kit by Chichi Designs
You can find this kit HERE
It was inspired by the tube I'm using in this tutorial

Mask of Choice
I am using Mask219 by Weescotslass Creations
You can find this for download HERE

Additional Filters
PhotoEffex - Scanlines
Xenofex 2 - Constellation

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame1
Add to your canvas
Resize down by 80%
Add a drop shadow

Open frame3
Add to your canvas
Resize down by 80%
Add a drop shadow

Open Paper3
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the circle frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete
Duplicate this layer
Filter → PhotoEffex → Scanlines
Width set to 3
change the blend mode to soft light

Open FlowerBrush2
Add to your canvas below the frame
Resize a bit
Erase any that's outside the frame

Open Paper2
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Open your tube
Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur
Change the blend mode to screen
lower the opacity to 50%
To the bottom tube add a drop shadow

Add your tube in between the two paper layers
Resize and position as you'd like
I flipped mine horizontally
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity of them to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

PearlsSparkle
SparkleTrail (no drop shadow)
Branch
Branch
Grass (no drop shadow)
Feather (no drop shadow)
Feather (no drop shadow)
PearlsSparkle (just one pearl)
PearlsSparkle (just one pearl)
PearlsSparkle (just one pearl)
Rainbow
DandilionSeeds
Grass2
Flowers
Flower2
Flower2
Flower

Add some wordart (there are some in the kit, I just used the same wording and made it my own a bit :) )

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!

Now to animate if you'd like to!

Duplicate the FlowerBrush2 layer 3 times
So there are a total of 4 layers

On the first layer
Filter → Xenofex 2 → Constellation
With the following settings:


Repeat these for the other three layers
Hitting random seed once for each

Go to your animation window
Hide all but the first FlowerBrush2 layer
Set to repeat forever
Delay of .15 seconds

Add a new layer
Hide the first layer
Unhide the second

Add a new layer
Hide the second
Unhide the third

Add a new layer
Hide the third
Unhide the fourth

Press play, watch it go!

If you're happy with your results save as a .gif and you're done!

Here is an example of it non-animated
Click to bring it to full size




~~Click on Sample to view full size~~
This Tutorial was written on July 31st 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Keith Garvey
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using “Orange Crush” by Designs by Sarah
You can find this kit HERE
It was inspired by the tube I'm using in this tutorial

Mask of Choice
I am using Mask141 by Weescotslass Creations
You can find this for download HERE

Additional Filters
VanDerLee - Unplugged-X

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame 2
Add to your canvas
Resize down by 70%
Add a drop shadow

Open pp2
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete
Duplicate this layer
Filter → VanDerLee → Unplugged-X
Pattern offset
change the blend mode to soft light

Open pp-3
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Open your tube
Add your tube to your canvas, resize and reposition to your liking
Move below the frame
Erase any of the tube that's outside the circle frame at the bottom
Duplicate
Move this layer above the circle frame
Erase any of the tube that's over the frame
Filter → Sharpen → Smart Sharpen
Amount – 500%, Radius - .2px, Remove Gaussian Blur

Filter → Blur → Smart Blur
Radius – 3.7px, Threshold, .2

Duplicate
Filter → Sharpen → Sharpen
Change the blend mode to soft light
lower the opacity to 50%
To the bottom tube add a drop shadow

Add your tube in between the two paper layers a couple of times
Resize and position as you'd like
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity of them to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

print (no drop shadow)
print (no drop shadow)
arrow1
arrow1
ribbon frame
ribbon 4
ribbon 3
ribbon 2
ribbon 1
bow 1
button
button
button
button
arrow 2
cupcake
ipod
camera
milkshake
heart

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!

Now to animate if you'd like to!

Duplicate the camera layer

Filter → Render → Lens Flare
Brightness – 100%
50-300mm zoom

Move the + to where the flash would occur

Now go to your animation window
Have two layers in it
Set to go forever
In the first one have the delay set to 2 seconds
and have the normal camera visible

In the second one have the delay at 0.2 seconds
With the camera with the flash visible

Press play and watch it go!

If you're happy save as a .gif and you're done!

Here is a sample of it non-animated
Click on image to see full size




~~Click on Sample to view full size~~
This Tutorial was written on July 31st 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of FourXsDesigns
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using “My Immortal II” by Pimp'd Designz
You can find this kit HERE

Mask of Choice
I am using Mask219 by Weescotslass Creations
You can find this for download HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame-05
Add to your canvas
Resize down by 80%
Add a drop shadow

Open pp-06
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete

Open frame-02
Add to your canvas
Rotate -70 degrees
Resize down by 57%
Add a drop shadow
Use your brush tool and close off both ends of the frame

Open pp-01
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frames
Select → Modify → Expand, by 2
Invert the selection
On the paper layer press delete

Open pp-07
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Open your tube
Add your tube to your canvas, resize and reposition to your liking
Move below the circle frame
Erase any of the tube that's outside the circle frame at the bottom
Duplicate
Move this layer above the circle frame
Erase any of the tube that's over the frame
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
lower the opacity to 50%
To the bottom tube add a drop shadow

Add your tube below the film strip frame
Resize and position as you'd like
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity of them to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Mask (no drop shadow)
Mask (no drop shadow)
blood-03 (no drop shadow)
blood-03 (no drop shadow)
Moon (no drop shadow, add an outer glow)
ribbon-04
splatter-03
flower-04
flower-04
sparkle-02 (no drop shadow)
clock-01
star-02
splatter-01 (no drop shadow)
heart-01
charm-01
book-02
greens-01
flower-01
star-01
flower-02
heart-02
ribbon-03
ribbon-03
key
sparkle-01 (no drop shadow)
sparkle-01 (no drop shadow)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!



~~Click on Sample to view full size~~
This Tutorial was written on July 31st 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of FourXsDesigns
You must purchase a license to use her tubes and can do so HERE
This has 12 layers
6 close ups, 6 full body
2 Latin, 2 American and 2 Jamaican

Template of Choice
I am using Template054 by Spawn
Which you can find HERE

Additional Filters
PhotoEffex – Scanlines
MuRa's Meister – Copies
Funhouse – Xaggerate
VanDerLee – Unplugged-X
Xenofex 2 - Constellation

~*~*~ Let's Get Started~*~*~

Open the template in your program
Delete the credits layer

Filter → MuRa's Meister → Copies
Wallpaper (rotate)
All at default

Duplicate this layer
On the bottom one

Filter → Blur → Motion Blur
Angle – 15 deg
Distance – 80px

Filter → Sharpen → Sharpen Edges
Filter → Sharpen → Sharpen Edges
Filter → Sharpen → Sharpen More
Filter → Sharpen → Sharpen More

On the top one
Filter → Funhouse → Xaggerate
Both at default (24)
Change the blend mode to Darker Color
Lower the Opacity to 70%

Add a new layer above “Grey Wavey”
Select the Wave
Make a gradient similar to mine:


On the new layer drag out the gradient
(I went from the top left of the wave to the bottom right corner of it)
Add a new layer below this new red white and blue wave
Select → Modify → Expand, by 3
Add the gradient to this new layer again, only drag it out in reverse
Filter → Noise → Add Noise
Gaussian, 12.5%, Monochromatic

Using the magic wand tool go to your tube
On the close up select the right bikini cup with the stars
Copy it
And then paste it into your canvas

Filter → MuRa's Meitser → Copies
Wallpaper (rotate)
All at default
Repeat

Change the blend mode to soft light
Duplicate this layer

Filter → PhotoEffex → Scanlines
Change the width to 3
Leave the blend mode at soft light

Select the Black Wavey
Go to the original layer with MuRa's Meister'd
Copy and Paste
Duplicate
Filter → VanDerLee → Unplugged-X
Pattern Offset
Change the blend mode to soft light
On the bottom one add an outer Glow

Add your full body tube in between these two layers
Filter → MuRa's Meister's → Copies
Line
Change the number to 7
Erase any of the tubes that are outside the wave
Change the blend mode to luminosity
Lower the opacity to 50%

Add some wordart if you'd like
I did American Pride -

Add your tube
Resize and Reposition as you'd like
Duplicate
Filter → Blur → Gaussian Blur, 3.0 px
Change the blend mode to soft light
Lower the opacity to 50%
Add a drop shadow to the bottom tube

Select the whole canvas
Add a new layer
Edit → Stroke
10 px, center, black

Add another layer
Edit → Stroke
7px, center, any color is fine
Select just it and fill with the gradient we used before
Add noise as we did before as well

Add your name

*****Most Important*****
Add your copyright information

Delete the Dots, Grey Wavey, Black Wavey & Main Background

If you don't want to animate save to your liking and you're done!

Duplicate the bottom layer 4 times
There's a total of 5 now
Hide the bottom one
Just saving in just in case I make a mistake :)

On the first one
Filter → Xenofex 2 → Constellation
With the following Settings:


Add it to the other 3 layers
Hitting random seed on each one

Lower the opacity of the layer just about these from 70% to 50%

Have the delay set to .15 and set to go forever
Have for layers in the animation window
only having one visible for each frame

Press play to watch it go

If you're happy with the result save as a .gif and you're done.

If you'd like to make an avi
I did it by merging my layers together and dragging them over and resizing to how I'd like
then readded the borders, names, copyright information

The animation is the same that I used before, only just on the black overlay border instead :)




~~Click on Sample to view full size~~
This Tutorial was written on July 30th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Ismael Rac
You must purchase a license to use his tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Rock Me” by Designs by Sarah
You can find this HERE

Mask of Choice
I am using BigMask019 by Vix
You can find this for download HERE

Animation of Choice
I am using SimoneAni227
Which you can find HERE

Additional Filters
PhotoEffex - Scanlines

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame 4
Add to your canvas
Resize down by 80%
Add a drop shadow

Open pp4
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frames
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete
Duplicate
Filter → PhotoEffex → Scanlines
All at default, width set to 2
Change the blend mode to soft light

Open frame 1
Add to your canvas
Rotate 90 degrees counter-clockwise
Resize down by 70%
Rotate -15 Degrees
Add a drop shadow
Duplicate
Flip Horizontally
Reposition on the canvas to your liking

Open pp1
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Open your tube
I did recolor my clothing, the ipod and the hair streaks to match the kit a bit more
This is optional as well, there are plenty of colors that'd look good with this kit!
Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Add your tube in between the two pink paper layers
Resize and position as you'd like
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity of them to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

star 2 (no drop shadow)
star 2 (no drop shadow)
print 1 (no drop shadow)
ribbon 2
string 2
tribal
ribbon 1
star
disco ball
music note 1
star
bow 3
ipod
flower 3
flower 2
flower 4
rock word art (add an outer glow)
bow 2
bow 2

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!

Now if you want to animate!

Open your animation that you're using
Crop the image so only the right notes are showing

Select all the frames
Click Ctrl + G
(this just groups the layers and makes the more easy to move and what not)

Now drag this over to your main canvas
Have it just below the ipod layer
Hide all the frames aside from the first one

Got to your animation window
Have it set to repeat forever, the delay set to .1 seconds

Add a new layer and hide the first animation frame and unhide the second
Add a new layer and hide the second frame and unhide the third
Do this for all the frames
When you're at the last one just reverse the process to make it loop

Once you're done, press play to see it in action
If you're happy with the results save as a .gif and you're done!

Here is a sample of the non-animated version
Click to view full size



Tuesday, July 30, 2013

~~Click on Sample to view full size~~
This Tutorial was written on July 30th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Shannon Rene-Justice aka Lollipop Labs
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Dance Princess” by Alika's Scraps
You can find this HERE

Mask of Choice
I am using Mask141 by Weescotslass Creations
You can find this for download HERE

Additional Filters
Penta - Jeans

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open as01
Add to your canvas
Resize down by 50%
Rotate -10 degrees
Add a drop shadow
Recolor to the pink
Duplicate
Flip Horizontally
Recolor to yellow
Add a drop shadow

Open Paper07
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frames
Select → Modify → Expand, by 3
Invert the selection
On the paper layer press delete
Duplicate
Filter → Penta → Jeans
All at default
Change the blend mode to soft light

Open paper01
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Add your tube in between the two orange paper layers
Resize and position as you'd like
I flipped mine horizontally
Erase any that's outside the frame
Change the blend mode to luminosity
Lower the opacity of them to 30%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

as06 (no drop shadow)
as17
as32
as28
as10
as09
as18
as20
as12
as31
as13
as03
as05

I added sparkles that I got from another kit of Alika's here, no drop shadow.

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


~~Click on Sample to view full size~~
This Tutorial was written on July 30th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Zindy S. D. Nielsen
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using the FTU scrapkit “Shades of Grey” by Candy's Treats
You can find this HERE

Mask of Choice
I am using BigMask001 by Vix
You can find this for download HERE

Additional Filters
None :)

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame2
Add to your canvas
Resize down by 80%
Rotate -9 degrees
Add a drop shadow

Open frame1
Add to your canvas
Resize down by 80%
Rotate 8 degrees
Add a drop shadow

Arrange them on your canvas as you wish
You can use mine as a guide :)

Open pp3
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frames
Select → Modify → Expand, by 3
Invert the selection
On the paper layer press delete

Open pp7
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Add your tube to the frames as you'd like
Erase where you'd like to as well
Lower the opacity of them to 50%

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

ele14 (no drop shadow)
ele22 (no drop shadow)
Ribbon4
ele22 (no drop shadow)
SpookyRope2
Ribbon6
ele19
ele19
ele3 (no drop shadow)
ele11
Leaves2
Flower5
SilverStud
SilverStud
Flower4
FlowerSmall
Bow2
Bow1
SilverStud

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


~~Click on Sample to view full size~~
This Tutorial was written on July 30th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Jennifer Janesko
You must purchase a license to use her tubes and can do so HERE
I used a paper from the kit I'm using to color the blanket or dress that's covering her to match the kit
This is purely optional if you'd like to or not. You'd have to use a black and white image to do so as per TOUs

Scrapkit of Choice
I am using the scrapkit “Teal Dream” by ChiChi Designz
You can find this HERE

Mask of Choice
I am using Mask219 by Weescotslass Creations
You can find this for download HERE

Additional Filters
PhotoEffex – Scanlines
Eye Candy 4000 – HSB Noise

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame3
Add to your canvas
Resize down by 65%
Add a drop shadow

Open Paper4
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frame
Select → Modify → Expand, by 6
Invert the selection
On the paper layer press delete
Duplicate the paper layer
Filter → PhotoEffex → Scanlines
All at default, except the width, change to 3
Change the blend mode to soft light

Open PetalBrush
Add it in between the two paper layers a couple of times
Erase any that's outside of the frames

Open Paper3
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Erase any of the tube that's outside the bottom of the frame
Have this just below the frame
Duplicate
Move this layer to just above the frame
Erase any of the tube that's over the frame
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

BubbleBrush (no drop shadow)
BubbleBrush (no drop shadow)
Net (no drop shadow)
Glittersplat (no drop shadow)
Glittersplat (no drop shadow)
Glittersplat (no drop shadow)
Branch
Branch
Flowercluster
Flowercluster
Ribbon1
Diamond (add this 2 more times for a total of three, merge them together and add a drop shadow to the merged layer)
Dangles
Fan
Flowers1
Flower1
Flower2
Ribbon2
Flowers2
Flower4
Flower3
Butterflies
Butterflies
Butterflies
Butterfly
Sparkles2
Sparkles2

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!

Now if you want to animate let's continue!

Go to your diamonds and dangles layers
Duplicate each of them 3 times so you have a total of 4 of each layer

On the first layer of each
Filter → Eye Candy 4000 → HSB Noise
With the following settings:



You can use the same one on each of the two layers so you don't have to change the random seed for both

Repeat this though and when you're on the second layer of each hit random seed once
And on the third hit it once
and on the fourth hit it once

Then in the animation window have it set to go forever with a delay of .3 seconds
On the first layer hide all of the layers except for the bottom of each

Add a new layer and hide the first layer and unhide the second
Do this for the other layers
Press play and watch it go

If you're happy with it save as a .gif and you're done!

Here is a non animated version of the tag
Once again click to view full size





~~Click on Sample to view full size~~
This Tutorial was written on July 30th 2013 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Anna Liwanag
You must purchase a license to use her tubes and can do so HERE

Scrapkit of Choice
I am using the scrapkit “Soft” by Rissa's Designs
You can find this HERE

Mask of Choice
I am using BigMask016 by Vix
You can find this for download HERE

Additional Filters
Penta – Color Dot

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame5
Add to your canvas
Resize down by 80%
Rotate -5 degrees
Duplicate, flip horizontally
Resize the duplicate by 90%
Arrange on your canvas
Add a drop shadow

Open Paper6
Resize to 600px by 600px
Add to your canvas
Use your magic wand to select inside the frames
Select → Modify → Expand, by 6
Invert the selection
On the paper layer press delete

Open Paper10
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the layer mask here

Add your tube to your canvas, resize and reposition to your liking
Duplicate
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
To the bottom tube add a drop shadow

Add the tube under each of the frames
Flip one horizontally
Change the blend mode to luminosity
Lower the opacity to 50%
Duplicate the paper background layer
Move above the tube in the frame layers
Filter → Penta → Color Dot
All at default
Change the blend mode to soft light

Now add which elements you'd like
I used the following from the bottom layer up with a drop shadow unless stated:

Flowers
Flowers
Pearls
Stars (no drop shadow)
Stars (no drop shadow)
String
Lights2
FlowerScatter3
Berries
Berries
Star
Star
Star
Star
FlowerScatter2
HeartDangle
HeartDangle
Pillows
Cup1
Flower4
Key
Cup2
Clock
Flower3
ButterflyScatter (just one from it)
ButterflyScatter (just one from it)
ButterflyScatter (just one from it)
ButterflyScatter (just one from it)

I added some sparkles here that I got from elsewhere, this is purely optional :)

Add your name

Crop your tag to get rid of the access space that's not needed

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with your result save to your liking and you're done!


About Me

My photo
Hey everyone!! Thanks for stopping by! My name is Ashly and I'm a 27 y/o SAHM to 1 little girl. I love designing in my free time as a way to destress a bit and have been making tags and siggies for about 6 years now but, am still continually learning. You can email me at: garyswifey06@gmail.com

Search

I CT For

Alika's Scraps
Chichi Designz
FourXDesigns
Candy's Treats
Photobucket

Categories