Snag My Blinkie

Chat Box

Followers

Blogs I Love

Karra's Kreative Korner
Tasha's Playground

Proud Member

Pimpin' Pspers
Creative Addictions
Creative Misfits

Blog Awards

Monday, April 30, 2012
~~Click on Sample to view full size~~
This Tutorial was written on April 30th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of FourXsDesigns
Use must purchase a license to use her artwork and can do so HERE

Scrapkit of Choice
I am using a FTU kit called “Lovely” by Scrapity Scrap and More
You can find this kit HERE

Mask of Choice
I am using Mask218 by Weescotslass Creations
Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open element (6)
Add to your canvas
Resize down to 60%
Add a drop shadow

Open paper (13)
Resize to 600px by 600px
Add to your canvas below the frame
use you wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer, press delete
Deselect

Open paper (4)
Resize to 600px by 600px
Add to you canvas, below the other paper layer
Apply the mask to this layer
Add your full body tube to the canvas
Resize and position to your liking
Duplicate this layer
On the bottom one add a drop shadow

One the top one
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light
Lower the opacity to 50%

Add the close up to to your canvas
Flip horizontally
Resize and position inside the frame
Erase any that may still be outside the frame
Change the blend mode to luminosity
Lower the opacity to 35%

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

element (63) – No drop shadow
element (15) – No drop shadow
element (15) – No drop shadow
element (68) – No drop shadow
element (62)
element (45)
element (41)
element (25)
element (55)
element (14)
element (34)
element (11)
element (36)
element (36)
element (52)
element (52)
element (79)
element (53) – No drop shadow
element (53) – No drop shadow

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 30th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Jakob Kramer
Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice
I am using a PTU kit called “Maybe Forever” by Farrah's Designer Scraps
You can find this kit HERE

Mask of Choice
I am using Mask84 by Weescotslass Creations
Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame2
Add it to your canvas
Resize to 80%

Open Paper4
Resize to 600px by 600px
Add it to your canvas, below the frame
Use your magic wand to select inside your frame, make sure you get all the little pieces it doesn't get around the leaves
Select → Modify → Expand, by 8
Invert the selection and on the paper, press delete
Deselect

Open Paper6
Resize to 600px by 600px
Add to your canvas below the other paper
Apply the mask to this layer

Open your tube and add it to your canvas
Resize and position to your liking
I flipped mine horizontally as well.
Duplicate this layer
Have one above the frame and one below
On the one below add a drop shadow
On the one above, erase and of the tube that is over the frame at the bottom
Duplicate this layer
Filter → Blur → Gaussin blur, 3.0 px
Change the blend mode to Soft light

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

Leaf3
Scatter2
Beads2
Sign1
Sign2
Charms2
Flower5
Flower5
Bow3
Bow3
Butterfly
Sparkle (no drop shadow, change the blend mode to overlay)

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 30th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Gary Rudisill
Use must purchase a license to use his artwork and can do so HERE
I got this tube while PSP Asylum was still open

Scrapkit of Choice
I am using a PTU kit called “Country Roots” by Jackie's Jewels
You can find this kit HERE

Mask of Choice
I am using Mask99 by Weescotslass Creations
Which you can find HERE

Additonal Filters
Xero – Porcelain
Xero - Radiance

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame3
Add it to your canvas
Resize down to 60%

Open Paper13
Resize to 600px by 600px
Add to your canvas below the frame
Use your magic wand to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer, press delete
Deselect

Open Paper10
Resize to 600px by 600px
Add to your canvas below the paper layer we added just before
Apply your mask here

Open your tube and select the layer you'd like to go with
Add it to your canvas
Resize and reposition to your liking
Duplicate this layer
Have one below the frame and one above
One the one below add a drop shadow
On the one above
Erase the part of the legs that are over the frame

Filter → Xero → Porcelain
All at default, except the blue channel, set to 0.

Filter → Xero → Radiance
Something subtle that just brightens your tube up a bit

Filter → Sharpen → Unsharp Mask
All at default

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

ChickenWire (no drop shadow)
Weeds1
Flowers2
Vine2
Cactus2
Barrel
Spoke
Hat
Boot
Bottle
Kitten2
Apples
Leaves2 (just one leaf)
Leaves2 (just one leaf)
Leaves2 (just one leaf)
Sunflower
Ribbon1
Ribbon1
Sunflower
Sunflower
LightningBugs (no drop shadow)
LightningBugs (no drop shadow)
horseshoe
Leaves1
Sunflower

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!


Saturday, April 14, 2012
~~Click on Sample to view full size~~
This Tutorial was written on April 14th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Lielman
Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice
I am using a PTU kit called “Turtle Crush” by Alikas Scraps
You can find this kit HERE

Mask of Choice
I am using mask84 by Weescotslass Creations
Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open as61
Add to your canvas
Scale down to 80%
Add a drop shadow

Open paper06
Resize to 600px by 600px
Add to your canvas below the frame
Use the magic wand tool to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer press delete
Deselect

Open paper08
Resize to 600px by 600px
Add to your canvas
Have this below the other paper layer we just used
Apply the mask to this layer

Open your tube and add to your canvas
Resize and position to your liking
Once you have this duplicate this layer
On the original add a drop shadow
On the top one
Filter → Blur → Gaussian Blur, 3.0 px
Change the blend mode to screen
Lower the opacity to 30%

Add your tube again beneath the frame
Flip horiztonally
Resize, reposition, change the angle a bit if you're needing to
Once you have that erase any of the tube that's outside the frame
Change the blend mode to luminosity
Lower the opacity to 30%

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

as55 (no drop shadow)
as54 (no drop shadow)
as35 (no drop shadow)
as35 (no drop shadow)
as35 (no drop shadow)
as45
as42
as75
as79
as72
as47
as30
as53
as52
as07
as23
as73
as22
as04
as36
as37
as08 (added an outer glower as well)
as26
as26
as25
as25

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!


~~Click on Sample to view full size~~
This Tutorial was written on April 14th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Cuddly Rigor Mortis
Use must purchase a license to use her artwork and can do so HERE

Scrapkit of Choice
I am using a PTU kit called “Don't Bug Me” by TammyKat Designs
You can find this kit HERE

Mask of Choice
I am using mask349 by Vix
Which you can find HERE

Additonal Filters
Xero - Porcelain

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open ribbonframes
Add to your canvas
Scale down to 90%
Angle to -25 degrees
Add a drop shadow

Open bluewrinkle2
Resize to 600px by 600px
Add to your canvas below the frame
Use your magic wand to select inside the frames
Select → Modify → Expand, by 5
Invert the selection
On the paper layer, press delete

Open redwrinkle
Resize to 600px by 600px
Add to your canvas below the other paper layer
Apply the mask to this layer

Open your tube and add it to your canvas as the top layer here.
Resize and position to your liking.
Add a drop shadow

Filter → Xero → Porcelain
All at default, except the blue channel at 0

Filter → Sharpen → Unsharp mask
all at default

Add your tube in each of the frames as you'd like
Erase any of the tubes outside the frame
Change the blend modes to luminosity and the opacity to 50%

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

ribbonborder-vertical
sequinstitches
greenleaf
greenleaf
bugheart-ribbon
redbow
sequinred
bugginword (added a stroke to this one)
whiteladybug
dottedbutterfly
pinkbow
sequinblue
sequinblue
sequinwhite
sequinwhite
sequinred
ltpinkbow

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!

Friday, April 13, 2012
~~Click on Sample to view full size~~
This Tutorial was written on April 13th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Elias Chatzoudis
Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice
I am using a PTU kit called “Soft and Sweet” by Designs by Sarah
You can find this kit HERE

Mask of Choice
I am using mask4 by Lizquis
Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame1
Scale down to 52%
Duplicate and the rotate each of them and position similarly to what I have in my example.

Open pp12
Resize to 600px by 600px
Use your magic wand to select inside of each of the two frames
Select → Modify → Expand, by 5
Invert the selection
On the paper layer, press delete.

Open pp1
Resize to 600px by 600px
have this just above the white background layer
Apply the mask to this layer

Add your full body tube to your canvas
resize and position as you'd like
Once you have this duplicate it
On the bottom one add a drop shadow

On the top one
Filter → blur → gaussian blur, 3.0 px
Change the blend mode to soft light

Add your close up of your tube
Flip is horizontally
resize and reposition, have the first one below the frame
Erase any that may be extneding outside the frame
Add a drop shadow
Duplicate this layer
Drag it above the frames
Erase any on the bottom that's over the frame or bow of the frame
Duplicate
On the one we just worked with convert to grayscale
On the top one change the blend mode to soft light

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

glitter3 (no drop shadow)
glitter1 (no drop shadow)
pearls
pearls
rose
rose
tag3
glitter4 (no drop shadow)
button1
button1
flower1
flower2
button2
button2
button3
button3
bow2
bow1

Add your name

Over your name add lace and create a clipping mask

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!

Thursday, April 12, 2012
~~Click on Sample to view full size~~
This Tutorial was written on April 12th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of The Hunter
Use must purchase a license to use his artwork
I got this tube while he was at PTE but is now independent
You can find his store HERE

Scrapkit of Choice
I am using a PTU kit called “Bliss” by PolkaDot Scraps
You can find this kit HERE

Mask of Choice
I am using mask23 by moonbeams and spiderwebs
Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open frame1
Add to your canvas
Scale down to 80%
Add a drop shadow

Open paper1
Add to your canvas
and scale down as much as you'd like
I went to just around the the frame so I cuold get as much of the detail of the paper in there as I could.
Use your magic wand to select inside the frame
Select → Modify → Expand, by 8
Invert the selection
On the paper layer press delete.
Deselect

Open paper6
Resize to 600px by 600px
Add to your canvas just above the white background layer
Apply your mask to this layer

Open your tube and add it to your canvas
Resize and position to your liking
Duplicate
have one above and one below the frame
On the one below erase any of the legs that are outside the frame
add a drop shadow

On the one above erase any of the legs outside and over the frame
Duplicate and on the new layer
Filter → Blur → Gaussian blur, 3.0px
Change the blend mode to soft light, opacity at 50%

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

element24
element9
element7 (no drop shadow)
element25
element31
element5
element7 (no drop shadow, small portions)
element28
element27
element20
element12
element12
element17
element18
element18
element18
element17
element34 (no drop shadow, an outer glow added, some erased)
element6
element11
element14

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!

~~Click on Sample to view full size~~
This Tutorial was written on April 12th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of VeryMany
Use must purchase a license to use their artwork and can do so HERE
This tube was a prepaid but, you can still get it buy joining the VIP Platinum club

Scrapkit of Choice
I am a PTU kit called “So Bitter Sweet” by Sam's Scraps
You can find this kit HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame 4
Add to your canvas
Scale down to 70%
Add a drop shadow

Open Paper15
Resize to 600px by 600px
Add to your canvas
have below your frame

Use your magic wand tool to select inside the frame
Select → Modify → Expand, by 5
Invert the selection
On the paper layer, press delete
deselect

Open Mat 1
Add to your canvas
Have it below the paper layer we just made
Resize and position as you'd like

Open glitter scratches 2
Add to your canvas
Have this between the frame and the paper backround we made
Resize and reposition to your liking
Erase any that's outside the frame

Open your tube up and add it to your canvas
Resize and reposition to your liking.
Once you have this duplicate it
Have one above the frame and one below
On the one below erase the legs that are extending beyond the frame, add a drop shadow

On the one above
Erase the legs that are beyond the frame and also over the frame
Duplicate it
Filter → Blur → Gaussian Blur, 3.0px
Change the blend mode to soft light, the opacity to 50%

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

glitter splat (no drop shadow)
glitter splat (no drop shadow)
ribbon 3
string
plant
flower 4
ribbon 4
leaf 1
leaf 1
leaf 1
flower 3
flower 5
flower 1
cupcake 2
flair 1
flair 1
gem 2
gem 2
gem 2
ribbon 6
gem 2
gem 2
gem 2
flower 8
ribbon 6

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!


~~Click on Sample to view full size~~
This Tutorial was written on April 11th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Tony Tzanoukakis
Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice
I am a PTU kit called “Good Girl” by Pimp'd Designz
You can find this kit HERE

Mask of Choice
I am using the following
The folder I have this in is only labeled New Folder so, I don't remember where I got it at all.
If it's yours or you know where to download it please let me know and I'll take it down and put a link back to the blog :)



Addiontal Filters Needed
Xero – Porcelain
Xero – Radiance
VanDerLee – Unplugged X – Pattern Offset

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Open Frame-02
Add to your canvas
Scale down by 80%

Open pp-04
Add to your canvas
Have below your frame
Use your magic wand to select inside to frame
Select → Modify → Expand, by 5
Invert the selection and on the paper layer press delete
Deselect
Duplicate this layer

Filter → VanDerLee → Unplugged-X → Pattern Offset
Change the blend mode to soft light

Open pp-03
Add to your canvas
Have this layer just above the white background layer
Apply the mask to this layer

Go to the full body tube and merge together the layers you're wanting showing
Add to your canvas
Resize and reposition to your liking
Once you have this

Filter → Xero → Porcelain
All at default, except the blue channel at 0

Filter → Xero → Radience
Something subtle that just brightens the tube a bit

Filter → Sharpen → Unsharp mask
All at default

Add a drop shadow to the tube

Go to your close up of the same tube and merge your layers together like you did before
Add it to you canvas, in between the two purple paper layers
Flip horizontally, resize and position as you'd like
Erase any of the tube that's on the outside of the frame
Change the blend mode to luminosity, the opacity to 30%

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

wire (no drop shadow)
doodle2 (added an outer glow here)
doodle2 (added an outer glow here)
doodle
doodle
greens
flower-03
bead-branch
ribbon-02
flower-02
flower-05
flower-04
halo (erased a bit of this to make it look like it loops around the frame)
star
ribbon-03

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!

Wednesday, April 11, 2012
~Click Image to see full size~
Here is a layout I made using the kit, "Just Beachy" by Kikeka Kits
She is retiring this one very soon so be sure to check it out and get it for a great price.
You can find the kit HERE - Be sure to get them before they're gone!

The pictures are of my little girl that I took while we were on a weekend away last year.

~~Click on Sample to view full size~~
This Tutorial was written on April 11th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Jennifer Janesko
Use must purchase a license to use her artwork and can do so HERE

Scrapkit of Choice
I am a PTU kit called “Ruby” by Kikeka Kits
You can find this kit HERE
It's actually going to be retired and is on sale for just a short time so get it along with some of her other amazing kits at a steal price!

Mask of Choice
I am using Mask99 by Weescotslass Creations
Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

This is a full sized kit so there is lots of resizing involved but it's WELL worth it!!
I did usually down to about 20% and then adjusted from there.

Open frame03
Add it to your canvas and scale down
Angle it a bit
Duplicate and adjust the angle and position of the frame
Add a drop shadow to both of the frames

Open paper10
Resize to 600px by 600px
Add to your canvas below your frames
use your magic wand to select inside each of the frames
Select → Modify → Expand, by 5
On the paper layer press delete.

Open paper01
resize to 600px by 600px
Add to your canvas just above the white background layer
Apply the mask here

Add your tube to your canvas
Resize and reposition to your liking
Add a drop shadow
Duplicate
On the new layer delete the drop shadow
Filter → Blur → Gaussian blur
change the blend mode to soft light and the opacity to 50%

erase the frame that's going through the other frame at the bottom
Add your tube to each of the frames
erasing what is extending outside of them
Change the blend modes to luminosity
the opacity of the bottom frame at 50%, the top at 30%

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

branch02
branch02
scatter03 (no drop shadow)
flower03
branch01
sequins
ribbon03
butterflies
ribbon01
ribbon04
butterfly
butterfly
flower02
flower01
button01
gem03
gem03
gem03
button05
button05
button05
button03
button03
button03

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!

Tuesday, April 10, 2012
~~Click on Sample to view full size~~
This Tutorial was written on April 9th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Scrapkit of Choice
I am a PTU kit called “Funky Easter” by TammyKat Dezigns
You can find this kit HERE

Mask of Choice
I am using BigMask008 by Vix
Which you can find HERE

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Add the elements that you'd like to resize, positioned and drop shadowed as you'd like.
I used the following from the bottom up with a drop shadow unless stated.

Foldedribbon-blue
grass1
flowerpink
goofysquiggle-drkpink
basket-purple
bunny
flower-blue
heartspurpleblue (just 1 of them)
heartspurpleblue (just 1 of them)
tinyflower-yellow
tinyflower-drkpink
butterfly2
button-purple
button-pink

Open paper1
Resize to 600px by 600px
Add to your canvas and drag to just above the white background layer in your pallate
Apply the mask here.
Add your name, I created a clipping mask with heartspaper

Add some wordart if you're wanting to

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!


Thursday, April 5, 2012
~~Click on Sample to view full size~~
This Tutorial was written on April 5th, 2012 by Ashly
It is of my own creation and any resemblance to any other tutorial is purely coincidental.

Please do not copy and do not post elsewhere.
Do not translate or script.
This tutorial is written as if you have a general knowledge on how to use the program.

***What you'll need***
Program of Choice.
I am using Photoshop CS5
But, if you know your tools you can use any program of choice

Tube of choice.
I am using the artwork of Rion
Use must purchase a license to use his artwork and can do so HERE

Scrapkit of Choice
I am a PTU kit called “Hoppy Spring” by Designs by Sarah
You can find this kit HERE
It comes with a set of clusters as well and we're going to be using one of those too.

Mask of Choice
I am using PTUMask8 by Vix
Which you can find HERE

Additonal Filters Needed
Penta - Jeans

~*~*~ Let's Get Started~*~*~

Start a new canvas
600px by 600px
Flood fill with white.

Go to the cluster frames and open Cluster 1
Add it to your canvas
Scale down to 70% and rotate 10 degrees
Add a drop shadow
Open pp9
Resize to 600px by 600px
Add to your canvas
use your magic wand to select inside the two frames there, get as much of it as you can
Select → Modify → Expand, by 7
Invert and on the paper press delete
Deselect

Add your tube and arrange and resize how you're wanting to
Once you have that duplicate the tube
On the bottom add a drop shadow
On the top one
Filter → Blur → Gaussian Blur, 3.0 px
Change the blend mode to soft light

Add your tube again
Have it below the frame layer
Flip horizontally, resize and reposition to your liking
Once you have that, Select the paper background
Invert the selection and on the tube layer, press delete
Deselect
Change the blend mode to luminosity, lower the opacity to 53%

Duplicate the paper background layer
Bring it to above the tube we placed in the frame in the pallate
Filter → Penta → Jeans
amount – 20, border – 4
Change the blend mode to, soft light

Open pp7
Resize to 600px by 600px
Add to your canvas, have just above the white background layer
Apply the mask to this layer

Now add which elements you'd like
I used the following from the bottom up with a drop shadow unless stated:

splatter3 (no drop shadow)
splatter1 (no drop shadow)
splatter2 (no drop shadow)
ribbon 2
flower 1
flower 1
flower 2
flower 2
bow2
bunny
carrots

Add your name

Image → Trim
Top left pixel color all boxes checked

Resize if you'd like to

****Most Important****
Add your copy right information

If you're happy with you're result save to your liking and you're done!

About Me

My photo
Hey everyone!! Thanks for stopping by! My name is Ashly and I'm a 27 y/o SAHM to 1 little girl. I love designing in my free time as a way to destress a bit and have been making tags and siggies for about 6 years now but, am still continually learning. You can email me at: garyswifey06@gmail.com

Search

I CT For

Alika's Scraps
Chichi Designz
FourXDesigns
Candy's Treats
Photobucket

Categories